I Took The Advice and This Time I Used Maps!

After I finished the last dresser – covered with vintage dress patterns – someone made the suggestion to try maps. And I just happened to have some old road atlases from those days before GPS (do you remember that far back! LOL), so I plunged in.

For the life of me I cannot recall where I picked up this desk, but it has been sitting in the third stall of the garage for a while. Its decent quality – inside one drawer is marked ‘Broyhill’ – so I figured it would be a good starting point.

As you can see, I almost forgot about taking ‘before’ photos… I had it already up on the table with the drawers removed!

DSCN4704Somehow these days, desks just aren’t in much demand. I guess with everyone having a laptop, sitting any where works and you’re no longer chained to a desk.

DSCN4705

DSCN4696

So, with the help from The Kid, we removed the extra legs and shortened the desktop and turned it into a nice sized little chest. The bottom drawer is nice and deep, great for storing bulky stuff.

DSCN4712I sold the sewing pattern covered dresser to this great couple for their daughter. She is into fashion, so it really appealed to her. When they came by to pick it up, they mentioned that they were looking for something for their son’s quite extensive Lego collection. Dad was a bit annoyed from stepping on those little plastic bricks in the dark as he was trying to check in on the kids as they slept – I’ve been there myself and it turns a very quiet excursion into some mighty loud yelps! So the very deep drawer might be just the thing for the family!

The whole process of adding the maps was the easiest and funnest part. I just sit and watch television and cut and paste. I did some strategic placements, on one side is the state of Missouri and Kansas and on the top is a nice map of the states. Following two nights of drying/curing, I applied two coats of polyurethane to give the maps a little staying power. It could even take a little scrubbing if it gets colored on.

I had the antique hoop knob pulls, rescued from a previous project that with a little green spray paint turned out quite unique!

The drawer that was removed from the desk section turned out to be the perfect size for a replacement drawer in a sewing cabinet that I am transforming into a little entry way table. Don’t you just love it when things come together? If you’ve been reading my blog at all, you know that I hate to waste anything… and when it can be reused and saved from the landfill, I am a happy recycler!

Tomorrow, The Kid and I are making the trek out to meet Rebecca “Becky” Collis of Collis Country Quilting! I am so excited to meet Becky and check out her setup. Most excited about finishing some of these quilts that I have been working on for the past three years!!I have another idea for a dresser makeover… would make the cutest storage piece for a little boy’s room. Have to keep my eyes open for the next perfect piece!julie

Save

A New (Old) Obsession: Monopoly

I don’t know about the rest of you, but Monopoly was a staple in my house growing up. We always had to have more than one game at a time as pieces – and especially tokens – were always walking off. So, we’d buy a second to replenish the first. Or vice versa. 🙂

So, it was no stretch of the imagination that I had to collect Monopoly tokens. I have quite a few now, I am guessing somewhere in the neighborhood of 40 or more sets, and some are super neat! I have learned much about the game’s evolution as well… did you know during World War II they didn’t use metal tokens (they needed the metal for the war effort) and wooden tokens were used in the game.

I will have to take some time to photograph all my sets. Most of them live on narrow little shelves in my home office, but recently I have started collecting again, so quite a few reside around the little free space I have around my keyboard.

IMG_3748

But along with collecting the tokens, I ended up with lots of other Monopoly pieces. Game boards, property cards, Chance and Community Chest cards and dice. But mostly? Monopoly money. And I just knew there had to be something fun that I could do with all of it.

I started kind of small, using some of the money to cover a star, boxes and tins. This was easy enough and once dry, I sprayed several coats of an clear sealant over the top.

But, I knew that I had to do something bigger. And once I found an older but sturdy four drawer chest, I knew what was going to happen next!

I started covering the sides with the Monopoly money and realized that covering both sides, the front and the top might be a bit too much. I finished the front and sides and kind of liked the plain white top (primer) but wanted to see what paint I still had in my arsenal. When I kind of squinted my eyes, I could see a lot of yellow/gold and the white, so I wanted to play one of the other three colors: pink, blue or green. When I checked my paint stock, I found a perfect blue (and there was plenty of it!).

There was, of course, the drawers that had to be covered as well. This was all well and good, as I was able to watch movies and do the gluing.

BTW, I simply used slightly watered Elmer’s glue, applied with a 1″ brush. Simply brush on the glue, lay on the bills and brush more glue over the top. It takes a little effort to make it look random and still cover all the surfaces. I tried not to get anything repetitive or lined up and tried to get as many upside down and sideways as right side up.

I left the bills overhang the edges and sides and once dry, simply used a single edged razor blade to make a nice neat edge. I couldn’t believe how easy this was!

Then I moved the cabinet into the garage and painted the top blue. It took several coats to get it saturated and looking really good. I also painted the inside edges of the drawer opens blue as well.

Once it was good and dry, I rolled polyurethane over the entire box and drawer fronts (twice!) for a really glossy finish. It will make everything last a long time too!

Now it was time to put drawer pulls on. It was The Kid who had the idea of making larger versions of Monopoly’s classic houses and hotels. And the houses were cut from 2″x2″ and the hotels from a 2″x4″ that we had in the garage. It was a fairly simple construction using the band saw. I then sanded them smoothly and painted them their iconic colors (standard Rustoleum high gloss paint from The Home Depot).

DSCN4600

We realized that they would need to stick out from the cabinet in order to be grasped, so The Kid cut 1″ dowels into 1/2″ segments and drilled through the centers (and of course painted). They were then glued into the centers of each ‘house’ and ‘hotel’ and by the time I got home from work, they were ready to be attached.

This is one of those jobs that I keep The Kid around for! He is so good about measuring and taking care of the fine details! All that was left was to move it into the sunshine and take photos!

And there it is! I think it would be great for a kid’s room, especially one who loves to play games (real games, not on their computers and phones) or to help organize a family room or rec room. It was just so much fun to make!

This particular piece was made using Monopoly Deluxe Edition money, but I have several different editions (including Junior Monopoly) that I still want to use for something! So much fun!

IMG_3751

Have you done something like this? I’d love to see what you’ve done!

julie

End of the Year: Projects Six and Seven

I think these are the last two projects to report on. Geez, if I could only get them all sold, I’d have both my entry hall and garage back!

The last two projects are a fall back to the Midnight Mosaic blue that I used on the two drawer antique dresser a while back. You can see it here:

Project Six: Buffet Makeover

photo 1This photo is actually flipped upside down so that you can get an idea of what it looked like. We picked it up free from Craigslist, as it had been used for a child’s art center or some such thing.

photo 4The outside was covered with sticky letters, which were quite a chore to scrape off, making sure to remove all of the adhesive.

DSCN2895I sanded the top to remove the old finishing. Trust me, I built some great muscles doing this! But under all of that was beautiful grain.
DSCN2909Again, as with all of the blue pieces, the top was stained with a natural color and sealed with three coats of polyurethane. The base was painted the Midnight Mosaic blue. The Kid did the honors of placing the brushed nickel cup pulls. I think this piece turned out exceptional.DSCN3021

Project Six: Coffee Table Makeover

The final makeover piece, a beautiful sofa table or coffee table. This was acquired in an auction some months ago. It was quite a nice piece with the exception of some peeling veneer on both sides of the drawer. I was able to repair it, but it wouldn’t hold up to re-staining, but would work with being painted.

DSCN2904Once again, Midnight Mosaic blue was the star. Not only did I much love the hue, the paint flowed nicely and adhered well. As with the other blue pieces, again the top was stained and sealed.

DSCN3014This piece did not originally have a knob or handle, but in keeping with the style, The Kid placed a single brushed nickel cup pull in the center of the drawer.

With this, I have wrapped up all of the projects that I had started. And just in time to ring in the new year!

3D-Happy-New-Year-2015May your festivities be joyous and safe! See you next year!

julie

The Sea of White is Now a Sea of Color

Just a quick update. The Kid and I have been our best to get these projects completed. We’ve been hampered by a spate of rainy and cold weather, subsequently we purchased a kerosene heater for the garage. It does the job of heating, but the smell is almost more than either of us can tolerate for more than a few minutes at a time. In fact, we took the day off yesterday as both of us battle migraine headaches. Headaches, I believe, came from over exposure to the smell. We are going to look into replacing the heater with something else.

The other thing that hampers us is that now it is winter, the sun sets so early. And along with that cold and windy weather comes an overcast sky, making working in the garage tenuous. The Kid has come up with an ingenious solution:2014-12-20 18.54.20Here are some more photos of the garage as painting continues:

 

2014-12-20 18.53.54Much of the white has bloomed into one of six shades of glorious pink. Have I ever told you how much I love pink? Could have something to do with being surrounded all my life with the opposite sex?!?

2014-12-20 18.53.43What didn’t turn pink was transformed with that recent discovery of Blue Mosaic – a deep but vibrant shade of blue that’s not quite navy. Its tough to pick out with the garage being kinda dim, but the two pieces are a buffet (far left of the pic) and a coffee table (you can see towards the right, its oblong top peaking out behind the pink cabinets in front). those two blue pieces have wood tops that have been sanded and moved into the house for staining and polyurethane. When finished will look like this two drawer dresser.

2014-12-20 18.53.54One chest of drawers (also known as a 5 drawer dresser) is a request piece. The body is an Ultra White with high gloss finish – actually called a mirror finish. And they aren’t kidding. Every time I look at it I think it was just freshly painted as it is looks so shiny! The Kid in the background is actually painting this piece’s drawers, five wonderful shades of pink.

Okay, for a “quick” update, I got kind of wordy! LOL

julie

Done! Done! Done! Done! and Done!

Wow! And a grateful sigh.

After a final push yesterday, The Kid and I finally finished the five projects that we have been working on. I wrote up the sale ads before I sat down and did the “before” and “after” photos… it took a while to find all of the original pictures of the pieces before we started working on them.

So here they are in all their glory (and unfinished states).

I stumbled onto a new site in which to procure furniture. We have a local company in town that does online auctions for business and people who need to liquidate businesses and estates. They have a pretty good website and at this point, not too many people know about it, so you can still get reasonable prices on certain objects. I find that most people going to the site are looking more for business items, so the furniture and decorative items tend to not have a lot of bidders. And to protect that source for as long as I can, I am not going to tell you their name. :-O

The first three items were purchased from this company. There were two matching dressers, one three drawer and one with five drawers. One drawer on each of the dressers had those faux decorative panels on one drawer on each of the dressers. Thankfully, they weren’t glued on and were easily removed.

5 Drawer Dresser

All the dressers then were sanded and primed. I love the use of a primer and since I knew I was going to do a lot of pink, I had the primer tinted pink to make the job of painting that much easier.3 DrawerThe three drawer dresser had some serious chunks missing from the top, so I opted to replace it. The great thing is that being a well built (not to mention all wood), the top was easily removed with the removal of just four screws. Then we just used it as a template for the replacement top.

Another of the antique dressers needed a new top as well. We bought it from a woman who had owned it for many years and had plants sitting on top of it. At one point the water damage to the original top was beyond repair and she had someone replace it. Only it was replaced with laminate fiberboard. UG-A-LY!

2014-11-08 19.19.11The resulting top for this dresser was cut out, sanded and routed into the exact shape needed. It got one coat of oak stain and three coats of a clear polyurethane with a matte finish (with light sandings in between each coat).

2014-11-16 16.02.01We purchase 2 6′ lengths of a nice oak, 1″ x 12″ and glued them together. We used a special tool to put wood dowels in the pieces to give them strength, we’ve done this multiple times including here. I think we spent like ten dollars on this tool, but it has paid itself back many times over now.

2014-11-16 16.02.01

Midnight Mosaic Antique DresserI stumbled across the blue in a advertisement for deck repair (would you paint your deck this color?) but immediately fell in love with it. The photo above looks a bit more purplish than it actually is, the color is called Blue Mosaic. The brass color cup handles were in my inventory of hardware and just went on so easily and they just are perfect.

On occasion there are pieces that I love so much how they turned out that I want to keep. I spent a couple of days trying to figure out if I could change the color scheme of my master bedroom plan so that I could use this piece. Alas, it is not meant to be. I love this piece.

A third dresser bought at auction is this older, albeit less expensive piece. It is still all wood and I imagine that the child who gets this piece could conceivably be outlived by this piece. I try to always only work with all wood pieces, no sense in putting a lot of time and effort into restoring or making over a piece that will just fall apart.

Dresser with Indent HandlesYou can tell that it is less expensive when it was first sold, as the drawer handles were actually carved out of the drawers, rather than added later. I thought about filling in the handles, but then thought it would be perfect for small hands and there wouldn’t be the chance that the drawer pulls would come off. We painted the top section of the front the first drawer color to make it appear like there was a drawer there. I thought about adding handles, but I think it would throw the look of the whole dresser off.

The last dresser was given to me by a wonderful guy who contacted me through Craigslist. We never got to meet, but exchanged several emails over a week. In the end, The Kid and I picked it up from his driveway, where he left it for us, since he had to leave unexpectedly. I regret not being able to meet and thank him properly, but hopefully he is watching the blog and will see this: Hi, Eric! And thank you!

When I was able to get a really good look at this dresser, I realized that someone had spent some time trying to remove past layer(s) of paint. They had done an admirable job thus far, and I looked it over and considered just how much time and effort would still be left to restore it. There is a fair amount of ornamentation on this piece which equated to a lot of hand work and in the end, just opted to paint it with the same pink ombré scheme that I have come to love so much.

4 DrawerAnd in the end, I opted to use white ceramic knobs on all of the pieces. I love those knobs… they are simple yet elegant and not cheap. And easy for small hands to clasp.

We moved all of the dressers into the foyer and let me tell you, two days of this and I am ready for them to be sold so I have my entry way back!

2014-11-22 09.44.19

This has made a huge dent in the third garage still. Today’s plan is to move what is left to the other side of the garage and prepare the space for storing my sports car for the winter. The car cover came on Friday, which was the last thing I need to properly store my baby. Once it turns cold and wet (or snowy) my car no longer is practical for driving.

The first thing I plan on doing, however, is to go and take “before” photos of all of the projects left. I think I have finally learned my lesson, since scrounging all emails and websites hoping to get the ‘befores’ for these posts were a real pain and took a few days.

Hope you’re all staying warm and comfy this weekend.

julie

 

Going Nowhere Fast!

I swear, the more confident you are about something, the more likely that it will soon become undone.

I titled my last post, “entering the final stretch” just in time to have a major monkey wrench thrown into the mix. I bought a 1″x8″ piece of pine 10 feet long and gave it 3 coats of polyurethane after routing a nice round edge. We had it attached as the backsplash to the butcher block top but due to not having exacting finish with our DIY wall, it was a little bit wavy. So we opted to put caulk in the small gap, just to keep things like screws and drill bits from rolling to the edge and down behind the cabinets. The built-ins aren’t exactly made to get behind or move easily, so I opted for filling in that space instead to prevent just such a need.

Unfortunately, what we thought was tan grout turned out to be ‘liquid nails’ and suffice it to say, that it was nearly impossible to get rid of. Each time we would wipe a little, it seemed to just get everywhere. We ended up removing the backsplash and having to actually sand down about a third of the butcher block top including nearly all of the extension piece to get rid of this stuff. Talk about going backwards! Of course, then it had to have the four coats of poly re-applied and that all just takes time. So, what did we accomplish in a week? Absolutely nothing!

But we made up for that today. The backsplash has been reattached, the lighting has been installed and is even on a dimmer switch and the shelf has been installed. We put up hardware on the pegboard to hang all the yard tools and reorganized project pieces. I sorted through about half of the existing cabinets and reorganized tools and equipment and materials. On top of that, I cleared out a huge pile of ‘stuff’ that has been accumulating and gave it away on CraigsList.

FREE STUFFI always seem to have more plans and projects queued up than I have time and money and space! But isn’t that always how it goes? When the opportunity for materials and furniture are presented, you just figure you will make time. But after moving it around about 3 to 6 times, I can be quite ruthless and just put my foot down and chuck a bunch of things that I know that I will never have the time to complete. Sometimes it seemed like a good idea at the time… know what I mean?

Between me and The Kid, we are just beat! Time to put up our feet and do a whole ‘lot of nothing.

I’d really love to be done with this thing tomorrow and be able to take our “after” photos. I had no idea when we started this that it would take this much time and effort! Maybe it is just old age catching up with me.

Okay, now let’s just hope some good stuff has been uploaded to Netflix. I don’t plan on moving much in the next few hours.

P.S. I once had an asian person (Chinese I think) tell me that my name in their language would be JU meaning standing or staying in one place and LEE, meaning quickly; making my name literally mean ‘going nowhere fast’. Ha! I love it!

Entering the final stretch…

I had no idea that this project was going to take this long. It seems that this particular project has just had the wrong timing, what with two new jobs and everything else that has been going on.

I’ve had The Kid doing the coats of polyurethane on the work surface and the very last coat went on last night. Okay, so I know that the extension doesn’t exactly match, but it is close enough considering that it will be getting dinged, dirty and resides in the garage! I am more happy that it is done.

DSCN2573

So, the butcher block top that was given to us is on the right and my 30″ extension on the left. This photo was taken when both had been sanded down to raw wood.

DSCN2574A closer look and you can see that the raw wood doesn’t even match. Again, I am okay with it even though it would have been much cooler if I had actually gotten closer to matching, but what are you gonna do?

You may have noticed the two holes drilled on either end towards the wall. Well, this is my system of getting rid of saw dust. Under the holes and behind the cabinets, I have tall plastic trash cans that will catch the saw dust. Once done working, simply sweep everything towards the holes. The trash cans can be reached on either end for dumping or what we’re likely to do is when the cans are getting full, we’ll just stick the end of the shop-vac into the holes and viola!

DSCN2577So, four coats of polyurethane and the pieces are becoming quite beautiful. But most importantly, the surfaces will be hard for all future work.

DSCN2581

The picture above shows two coats, the one below is with the fourth and final coat. Once we get the tools spread out over it, you’ll hardly notice the difference in woods.

DSCN2580

As you can see, I have kept collecting carpets (yes, free from CraigsList) for the garage floors. I occasionally will run out to the garage for something and I really hate having to stop and put on shoes. And it is easier to convince the kid to vacuum rather than sweep. Like rugs of the past, when I drop paint or stain on them, I simply roll them up and throw them away.

I am still working on a project that will house my extremely large collection of embroidery thread. I am also working on a thread that celebrates paint stir sticks and all the wonderful things that can be made from them.

Simply gluing them side to side creates a wonderfully thin piece of wood which has a nice wood grain… you can see it in the picture below:

DSCN2582

I created a template and then used to it draw the cutting lines for the drawer dividers. Luckily for me, it was The Kid’s job to make all those cuts! I will write a post from beginning to end on this storage cabinet that started life as a small desk. I love looking at something and seeing something different.

DSCN2584

Last quick update… Some time ago, I had purchased these wonderful cabinet knobs. I almost forgot about them as they did travel all the way from China. They arrived last night and so I had The Kid replace the knobs on the upper cabinets of my computer work office… and if you didn’t know it before, you will now: I am a huge Mac fanatic. This is just the icing on that revalation!
DSCN2586

A overall shot of the computer room… you almost can’t see the shapes of the knobs, but trust me, they are there. 🙂

DSCN2587

Okay, so that’s it for today. This weekend will be spent completing the garage project and getting it all in a post before I head back to work on Monday. I hope you’ll come back and see the grand unveiling!

julie

 

Garage Remodel: Workshop

As you may know, I have been putting in a lot of time and effort to making my garage a better place to work and be able to park my vehicles inside. I have started a new job and it seems that a lot of my time and thinking are spent there and not at home and in the garage.

We did quite a bit of work this weekend, but still not finished. DSCN2562From this photo, you can see that I was able to get at least one car into the garage. We’re smack dab in the middle of tornado season and I just finished paying off my little sports car, so I was happy to have it garaged.

DSCN2563I did pick up the grey cupboards and got them installed, along with the butcher block counter that came from a free work table. I loved the countertop, but didn’t want the open space below, it was much too easy for things to just get jammed in there and look messy and dirty and filled with saw dust.

The top wasn’t long enough to cover both cabinets, so I made an extension. I cute 2 x 2’s into 30″ segments and glue and screw them together. Then I used a concoction of glue and saw dust to fill into the spaces left from the slightly rounded edges of 2 x 2’s and let them dry. The pieces all assembled were a tad too shallow to match up with the existing countertop, so I glue the pieces to a sheet of 3/8’s luan, which actually stabilizes it as well. I bought another tool that I’ve been wanting, a belt sander, to make the job of smoothing it all a tad easier.

DSCN2564The piece was laid end-to-end with the butcher block and then glued. The entire top was bolted to the lower cabinet and inset to keep a smooth surface. I opted to cut off the corner as I could easily envision bumping it with my hip every single time I came into the garage. 🙂

This week, The Kid has been tasked with sanding the existing butcher block top down to bare wood and then I will put a few coats of polyurethane to give it a nice hard surface that should endure. And it should look pretty sharp too. I am hoping that by the end of next weekend, this will be completed.

DSCN2572At the right end of the work surface is a 10 foot high storage. The space not easily accessed holds less used items and the center I made into a paint station. The paint rollers are stored on a dowel placed end to end inside the cabinet and one cubby hole below holds brushes of all kinds and roller pads. The lower cabinet will house the shop vac and all of its accessories as well as some other materials that just are unsightly. Still room at this point to use to store tools and materials.

At the right of the photo in the smaller garage stall are two (free) shelving units, one holds tools boxes and the other holds the one gallon paint cans. The quart cans, the sample jars and spray paint are all house in one of the existing cabinets the line the back of the the garage.

DSCN2571At the end of the white shelving units are a little workstation. I picked up this smaller sized cabinets I picked up free from CraigsList a year or so ago. On top is a piece of salvaged Corian countertop and then collected drawers are utilized to create storage for much used materials, like sandpaper for the sanders.

DSCN2570This is a quick shot of the third stall, currently packed with projects and more materials. Once again, from CraigsList, I got the carpet squares free and it pretty much carpeted this side of the garage. It will serve as a nicer place to showcase finished items and they can be parked on once winter comes. Heck of a mess, right? I know it is driving me crazy to not have more organization here!

I did manage to get the dead trees in front of the house replaced as well. Hopefully these will fare better than the previous ones, I even used Miracle Grow potting mix to plant them.

DSCN2566

DSCN2565

DSCN2567

DSCN2569

The Kid has been working on his own project as well, this is going to be a metal forge. A couple of weekends ago, he and I walked along the train track near the silos downtown and picked up pieces of coal that had escaped from the coal cars. We ended the night getting what we needed, but was escorted off the premises by two of Kansas City’s finest. I guess that trespassing around large train cars is bad or maybe dangerous… but I guess I can understand it from the railroad’s point of view.

Once The Kid has made some progress, I will let him do a guest blog post to explain what he is making and how to do it. Again, for him it is good skills to have and to know that it isn’t something that he would want to do for a living. I keep telling him that he is better off working with his head than his hands and his back.

Just as soon as this garage project is done, I will have photos up here. Thanks for hanging in there with me!

Tale of Four Victrolas, Part Red

So, with the last post, I began telling you about four old Victrola cabinets that I picked up for free from CraigsList. I showed you the first (along with a purple vanity makeover) and here is the second Victrola cabinet.

01414_146BGjp6j5f_600x450

Technically, this cabinet isn’t a Victrola, but the brand name is Cecilian. Personally, I’ve never heard of that brand, so out of convenience, I will just refer to as a Victrola cabinet. 🙂 This one is the one of the left in the picture above.

This next cabinet was destined for the same treatment as the turquoise one, until it hit me one day. I have a little area of the dining room table where I do bills and mail. I have, for some time, been trying to get the dining room table cleared, so that we could, oh, I dunno, eat dinner there?

So, I opted to keep this one and turned it into a mail organization station. I think it was kind of inevitable, considering that it was already painted the perfect red (remember how much I love red?)… which, I assure you was coincidental.

This particular cabinet started out much like the last. The body was in need of some real reconstruction, but the top was in pretty good shape. So, the body was primed, sanded and painted and the top got the customary two coats of walnut stain (with a light sanding in between) and then two coats of polyurethane. Once I decided to keep this one, I opted for some really nice hardware (read: paid some real money!) and got just the right look.

The inside was finished, again, much the same way as the first. Hate to be redundant because I am feeling like I am starting to sound like a broken record, but the inside was so nicely preserved that really a good wipe down with cloth and then a very light coat of poly to seal it all.

DSCN2397Then, with the help of my handy assistant, we installed two metal rods to hang folders in the open side. It was really very easy and inexpensive. The 5 foot steel rod was a mere two and a half dollars at The HomeDepot and The Kid was able to cut them easily and a couple of drilled holes and they were installed. I had this little pencil holder gadget from something I had taken apart in the past, and I thought it was the perfect finishing piece to keep a pen or two handy.

DSCN2399

The other side, I left without any changes (I think this was where the records were kept when it was a music player), so I can keep whatever I need close at hand.

DSCN2398So, after completing it, it was a matter of pushing it into place and loading it up. I know that I have a habit of filling up a space (and then some!) and I am worried this is a little much for the space. I’d like to think that if it helps me organize the space, then it should be okay. What do you think?

DSCN2396So, originally when I thought that the piece would be for sale, I painted a matching mirror. If you recall, I picked up three of these mirrors from the Penney’s Outlet store for a pittance and the idea was to include one with each of the cabinets.

I definitely don’t have space for a mirror in this room, since this one is pretty much filled with windows. So, I will either include this with something else or sell it by itself. Either way, I love that red! 😉

DSCN2406Okay, now I am down to the last two cabinets. One will require that we build a new lid but I am excited that the Kid and I have the skills to do this. I promise I will take more pictures!

Today was an ‘off’ day, I think that the Kid and me deserved to sleep in late. Right back at it tomorrow though!

julie

 

Tale of Four Victrola Cabinets (and a Vanity)

Have I told you how much I love CraigsList? In my city, it is amazingly active, including the Free section. For instance, a few weeks ago, I picked up four Victrola cabinets from a man who restores them… but it often took many different units to get enough parts to get a single player in working condition. He had accumulated quite a few and apparently one night, it was more than he could store.

01414_146BGjp6j5f_600x450You can see that he still had a few more that he had to give away. Those four were enough for me. 🙂

So, I have finished the first two. One for me and one to sell. Let’s start with the one for sale. It would be the one to the furthermost right in the photo. The top was in decent condition, so it was sanded down to the original wood. Following, it received several coats of a dark turquoise color. I was careful to paint only the body. As I said, I sanded the top down to a beautiful wood grain, so I gave it two coats of a walnut stain followed by two coats of polyurethane. The top just shines.

DSCN2365I fitted the right side (where the megaphone and the actual phonograph had been) with a plastic tub for ice. I found one that fit almost perfectly, adding a ledger for the lip of the tub to rest.

DSCN2402All of the interior wood was cleaned and a coat of walnut to enhance the existing wood finish. This thing was in absolutely beautiful condition. I added the brushed nickel knobs to complete the cabinet. I had wanted to purchase some old decanters and at least one set of high ball glasses and maybe some champagne class to set a nicer stage for photos, but the whole idea of this thing is to make money – as much as possible.

DSCN2405

I picked up three mirrors a couple of years back from Penney’s outlet store, they were $200 originally and marked down to their final price of $20! When I saw them, I couldn’t say no, even though their wood finishes were very scratched. My instinct was to paint them anyway, so I had purchased all three. I painted one with the same paint as the cabinet and am selling them as a pair.

A few more photos of the cabinet for your viewing pleasure.

DSCN2404

DSCN2366

DSCN2403

I have another almost finished that I have decided to keep. I will show you that one soon. The next project I finished though, is this nice vanity… well, the finished product is nice anyway. It was in pretty bad shape with I picked it up though. This one took quite a bit of work to get it to the point of being able to paint it.

DSCN2336I had determined to do something different this time, rather than the standard pink or (off) white. Lots of young girls like pink, but there are probably about just as many who like purple. So I started with a purple I had in stock.

DSCN2354After the first coat of this particular purple, I thought that it looked a little too much on the red side of purple, so I purchased a purple that leaned toward blue spectrum and started the painting process all over again.

DSCN2410I also added the wood detail on all four of the drawers as well as the rope trim, since sanding required most of the original trim to be removed. I also purchased a piece of quarter inch glass for the shelf in between the cabinets. I think this came out really beautiful.

DSCN2409One of these days I am going to have to figure out how to take good photos of furniture with mirrors. I always seem to get a reflection of the weirdest stuff when I take them!

DSCN2408Here it is in all of its purple glory! I have these two pieces listed on CraigsList and hopefully they will sell quickly. I am working on one more, almost done and then there are two more that I have to get started on.

julie

%d bloggers like this: