Dollhouse Reveal: More of the Exterior

One of the things I forgot to add to the first post of the dollhouse reveal was some of the original photographs.

I had asked my Dad for a dollhouse ever since I can remember. I was the seventh child and of the six before me, four were boys (and two more following). Lots of little boys in this house. It was kind of unusual for my Dad to have to do ‘girl’s toys’ but I kept asking. Finally, about the time I got married, my Dad finally got the time and energy to build a dollhouse. It took him quite a few years and I had moved away from my parents (in Iowa) all the way to California. When Dad finished the dollhouse, I guess he couldn’t figure a safe and affordable way to get the house to me, so instead, he gave it to my oldest sister (she is 11 years older than me) and who lived in the same town.

Well, fast forward about ten, maybe fifteen years and the dollhouse sat almost untouched – some of her children and grandchildren messed with it and broke a few things – and to my sister’s credit, she did buy a lot of stuff for the house. But then came the time my sister and her family decided to move to Colorado and no longer had a place for the house. Time for it come to me! Believe it or not, my folks drove the house out to me in their van!!

Let me show you some of the early pictures:

This slideshow requires JavaScript.

Isn’t it grand? A few things that happened during this transition was the base of the of the house was lost along with the railings and stairs on the porch.

Another issue that I felt needed to be changed was the fact that the kitchen had its own staircase to a secluded room above it – which just happened to be the “servants quarters”. Now I know this is supposed to be one of those broad sweeping houses from the old south, but this layout didn’t settle well with me. And as with anyone who buys a house, they want to make it their own – well, I wanted to make some changes to make this house my own as well.

So, out went the kitchen stairs – and an old fashioned kitchen – replaced with a gleaming and sophisticated red and white kitchen (reveal later). I opened the wall between the kitchen and the dining room and placed double doors for easier access. Next, a hallway was opened up so that the former servants quarters could be accessed and it became a nursery.

I also had to open the attic floor to allow a staircase up, added a wall to create another space and doors between the rooms to allow passage from one to another. Since I was having to invest in doors for the new rooms, I opted to replace all the doors for a more cohesive look. This also went for the addition of the stairs and I had previously purchased a gentle curved staircase, so out went the originals including handrails. All of these additions and changes not only created extra cost, most of the time it also created more work in widening and heightened to accommodate the new doors. This was really tricky with the sloped ceilings in the attic.

Then both the exterior and interiors were painted white. Lots and lots of cans of white spray paint. Remind me to tell you the lesson I learned about using spray paint in the same space as your red sports car. 😦

The house was turned upside down and I used this “ceiling texture repair” to give all of the ceilings a nice finish. Now it was finally ready for decorating to begin:

dscn4885

The house was moved up to the living room for easier access (no running up and down the stairs to the basement) and eventually all the supplies and tools were relocated to this area. I am so lucky that I live with people who are accommodating!

julie

Dare I Say It? The Dollhouse is… DONE!

I guess technically, I don’t see the dollhouse as ever really being “done”. I will be constantly adding or changing the house as I find small objects that will be added. And I still want to add clear plastic “doors” to keep the level of dust down and prevent any prying eyes and fingers from invading its interior.

But, I have gotten the dollhouse to the point where I feel that it is done. It has been renovated and painted. Its windows, doors and staircases have been replaced and updated. Flooring has been laid, built-ins completed and the house has been furnished and ready for someone to move in.

dollhouse-numbered-rooms

When I first moved the house to the living room from the basement, I took this photo to use as a reference when describing or referring to specific rooms. I will include it in the posts over the next several days as I reveal the work that has been done.

Today, I want to show you the outside, or more apt, the front of the house.

DSCN4989

Here it is, in all of its simplicity. I’ve done only a minimum, as I’ve run across a shortage of funds right now. Three major things missing are the porch railings, the widow’s walk railings and shutters. Purchasing these particular items are going to cost somewhere in the realm of the three hundred dollar mark, so out of the budget right now (I actually have work to do on the real house I live in!).

They will be easily added when funds are available without impact to the interiors, so I am not concerned. I did make and install the flower boxes and seeing as it was ready for the fourth of July, I wanted to include a flag. I had enough leftover railings from the interior to fit the small balcony, I plan to match the railings on the porch. I also have a small working porch light that I have to figure out how to install.

So, this is the first in a series of posts to show you the house. I have taken a ton of photos and also created some tutorials on how I did a few things that I will also add as I write.

For now, I will just leave you with more photos of the front:

DSCN4994DSCN4993DSCN4992DSCN4991DSCN4990Please keep coming back! And if you have questions about anything you see, please let me know in the comments section.

julie

Dollhouse Flooring: Lots of Options

In the process of completing my dollhouse, I found that there are many options when it comes to flooring. I think that my Dad’s intent is that all of the rooms would have wood floors, but then when he originally built the house it was supposed to be a early 1800’s house (complete with servants’ quarters). I, of course, updated the style of the house to be contemporary; I likened it to actually remodeling a real house to standards of the day (bathrooms, running water, electricity and a modern kitchen).

One thing I learned the hard way was the doors and door trim. I think even before the flooring goes in the doors should go up. I did it the hard way and now with trying to get the pre-made doors installed, I am finding that the openings are being blocked by high floors – especially where I used miniature tile. Thankfully, The Kid is tackling this job for me.

So back to floors. I have used a wide range of flooring options and even created a few that I didn’t use. Originally, the kitchen was to be a pale shade of yellow, as I had purchased this awesome fifties’ style dining table and yellow chairs.IMG_4157As you can see, there were a number of flooring options, including the checkerboard pattern in yellow. In the end, I used a red and white checkerboard pattern, which is reminiscent of the entry way and living room black and white.IMG_4155The kitchen is laid with samples that I ordered from WilsonArt’s website, but the black and white is actually individual tiles that I got from Home Depot.IMG_4153For the ‘sewing room’ I also picked up some green variegated tile samples and cutting to squares and then laying them in the checkerboard pattern.

I meant to mention this wonderful person’s name that I met in Home Depot and am just now getting around to writing the post. If you’re ever in the Kansas City area, look for Cheryl Lupton, who spent time with me brainstorming about ideas for flooring. She had inexhaustible enthusiasm for the challenge and loved the time we spent together! (Hi Cheryl! Sorry it took me so long!).IMG_3930Anywho, Cheryl was the one who showed me the tile samples that they keep in the store. These are about 2″ x 3″ rectangles and I just cut them into squares and then adhered them with E-6000 glue. I was going to visit several Home Depots so that I didn’t take all the samples displayed, but wonderful Cheryl told me to take all I wanted! Yea! Saved a bunch of time, driving and effort.IMG_3929She was also the one who told me I could order samples of the laminate online as well. And I am going to share that with you here: http://www.wilsonart.com. Just browse through all of the different types of laminate and once you find something that interests you, click the link to order samples.IMG_6154There is a limit of some of the colors or styles and you can only order 50 samples at a time. I think I went a little overboard when I found out, and ordered way more than I could ever use. (I am still trying to come up with a project that will use them!) I had ordered lots of pink samples and one in particular had a woven appearance and the right shade of pink. So, two of the laminate samples made up the nursery floor.IMG_4147So, laminate samples for the kitchen, living room/entry way, sewing room and baby’s room. Somewhere along the way, I had a package of “real wood” miniature flooring from HouseWorks. IMG_4085I wanted the dining room to have a beautiful wood floor and after taking the largest piece for the dining room, there was enough left to piece together for the attic home office. Sort of makes sense that one would do a patchwork of what is available for the floor in the attic. It turned out pretty good, I think!IMG_4149So, for the two bathrooms, they got tile. Some time back, I ran across these large packages of assorted colors of mini tiles to be used for making stepping stones. By buying three of them, after sorting I ended up with a nice selection of colors and about half of it was white.IMG_3967So in one bathroom, the floor and the shower walls are actual tile! Blue and white went on the floor in an everyday checkerboard pattern with a white row of tiles around the edges.IMG_4151

Now, the other bathroom, which is also the laundry room, is done in green and white tiles. I didn’t have enough of any one shade of green, so I used three different shades of green alternating with white. Viola!IMG_9260You have no idea how difficult it is tiling with 3/8″ tile! I had some issues keeping them level and straight!

Okay, that takes care of eight of the 12 rooms. For the boy’s bedroom and the master bedroom, it was always in my mind to use carpeting. Again, I had some packages of dollhouse miniature carpeting from a company called ‘MiniGraphics’ that had been purchased somewhere in the past 25 years. When I purchased it, it was for the living room along with some light blue sofas, so it must have been sometime in the 90’s. I had also made curtains, blue and yellow plaid over sheers. So much different than what I ultimately decided to use.

IMG_4156So, off to one of my many jaunts to JoAnns. I knew what I was looking for but not sure if I would find it. But of course, I did, and the tight weave and low plush made it the perfect faux carpeting. A deep grey color would work as a perfect neutral, although I only needed it for the two bedrooms. Bought enough to carpet every floor in the dollhouse!

IMG_4150So, we’re up to ten of the 12 rooms with the flooring complete. The hallway in the upstairs was one that I hadn’t planned for and the floor plan change ended up with quite a bit of square footage (inch-age?). This was a chance for me to experiment a little and having watched an online video about using Popsicle sticks and so set off to implement this for the hallway. I cut different lengths and then laid them down using the E-6000 glue, then staggered the lengths and used a wood putty to fill in any spaces. I then stained them using a medium oak color and then put two coats of clear polyurethane to seal the color. Turned out better than I expected. If I did this again, I think I would buy coffee stir sticks – they are a bit more narrow and would fit the scale better.IMG_4152(What do you think of my little clip board? Also made from laminate!!)

The last room is actually a storage space in the attic and it will remain without a finished floor, much like real attics.

So, there it is. I hope that this has helped in some way. Sometimes you just gotta jump in and do it and figure it out as you go.

Thanks for stopping by! Come back when I am finished and unveil it! It’ll be soon!

julie

Save

Frustration On The Creative Endeavors – When You Can’t Get Anything Finished!

Ever have one of those days? Well, I am having one of those months! I have about ten projects all going at the same time and it seems that for one reason or another, I cannot get a single one finished! Timing or materials or weather, something seems to stand in the way of completing the project.

My big project and the one I am most excited about is now 99.9% complete! I am waiting on one more simple (or I hope simple) finishing touch and a nice day of weather to get the project photographed. Argh! It is so frustrating to be so close to completion that I have nightmares about it! No joke!

I’ve stopped picking up project pieces since the weather is going to soon become the kind of weather that prevents me from driving my little sports car. When that happens, I usually drive it into the third garage stall, cover him and put him into hibernation. Well, in order to do that, I have to get that stall cleaned out, so I have been a busy little beaver trying to get things done. It is either that or get rid of them. And I am trying to do both.

I picked up this awesome antique bench thinking it would be an easy project, but it has turned out to be anything but. Sigh. I work on it a little and then get frustrated or tired of fighting with the four million staples/nails/tacks and move to something else.

I am close to finishing the four poster bed frame that I am painting in the same pink ombré style, but of course, I had to spend an inordinate amount of time to find the right connectors for the side boards, so it too has taken a place at the back of the line.

I picked up this not-so-little entertainment center for the express purpose of harvesting pieces – like the doors and drawers and shelves – as I am planning on building a gun cabinet for The Kid’s personal collection of antique fire arms. They are very nice pieces, so the cabinet needs to be of the same quality. This thing weighed like two thousand pounds when we picked it up and much of it is turning out to be real wood (as opposed to the junk compressed wood in many) so I am harvesting much more than I thought I would be. And of course, it too, was well made with about a ton of glue, staples, screws and nails so it is taking much more effort to get it apart than hoped.

The end table to dog crate too, is almost complete. It has turned out to be a bit heavy, so as an added bonus, I am planning on adding wheels (found on the entertainment center) to make it easier to move around. Of course, the wheels are on the bottom of the entertainment center, so they are close to last in coming off, but maybe – just maybe – that can be completed today.

As I said, the weather is starting to turn which is just raising havoc with the arthritis in both knees. Did I mention that I am tentatively scheduled for dual knee replacement surgery in January? Something tells me that work with come to a screeching halt in the garage for a while then. 🙂

photo 4As a consequence of the weather and knees, I’ve been back to sewing some. I made a personal vow not to make any more quilts until I can get some of the tops completed quilted. My best guess is that there is between 200 and 300 waiting for someone to do this step and then I do the binding. I just cringe each time I think about the money that will be needed to do this. So, they wait.

In the meantime, I’ve been working on using up my scraps. I just put on a good movie and sew, really without much thinking. I’ve also been working on a postage stamp baby quilt (I think I might be able to do the quilting on my sewing machine) just to use up these last few hundred pieces. A few years ago, I ordered this box of charm pieces (2000!) that are 1.5″ squares and used a good deal of them in several quilts. I just can’t bring myself to toss the remaining, although they are what I call “the uglies”!! Does anyone else here have this issue?

I’ve also been working with felt pieces while I ice then heat my knees. I’ve made a bunch of Christmas decorations (although we don’t really celebrate or decorate in the house), as well as working on another needle book. I need to just need to finish the cover. Of course over in the corner next to the fireplace is that great big hulking needlepoint project… just sitting there mocking me.

I’ve resisted writing just this post – the one where I admit that I can’t seem to get anything completed! Its just so aggravating and humbling to have to admit to all this incompleteness! I really try to hold myself to a higher standard, but sometimes it is so overwhelming – and I realized that it has been quite a while since I last posted. But to have to post and say I’ve got nothing! Argh!

Best intentions aside, time to get on with the day. I really need to assess what is left and what still needs to be done and what is required to get to that point. And then just start tackling them, one by one.

Wish me luck! And to all those out there who think us bloggers just get things done out of discipline and attention? We’re just people too and infallible. So don’t worry that you’re project(s) isn’t getting done. It happens to all of us!

julie

Every Little Girl Needs a Dollhouse or Two… Right?

I don’t think I’ve ever talked about my dollhouses. I was never a very ‘girly’ girl, growing up mostly surrounded by my brothers and their friends. I like to play baseball (not softball), football, climb trees and pretty much anything that the boys did. So, I didn’t have the normal toys that most girls play with – although I did have an EasyBake oven and some Barbie dolls.

So, after I had grown up, some how I did get a bit more feminine. I think I started to maybe wax nostalgic for something I think I missed. About the same time, my Dad was working less and spending more time in his wood working shop, so I asked if he would build me a dollhouse. Many, many, many weeks and months later, he did complete it. He sent me photos occasionally to show me progress, and I started purchasing materials, furniture and anything that might work for completing the dollhouse. He built the structure, I was going to decorate it and furnish it.

The only downside was that I was living in California and this monstrosity that my Dad was building was 2000 miles away in Iowa. I brainstormed ideas until I found out that my Dad had given my dollhouse to my oldest sister! She lived in the same town, so I suppose it was just an easy answer, but I was severely disappointed. I had been the one to ask for it, want it and already buying stuff for it.

So, I bought myself a kit and built a little dollhouse. It wasn’t anything fancy, but it did satisfy the desire to build, paint and furnish one.

I didn’t get a shot of the front of the house, but it was completed in the same style. It sits downstairs in a little alcove on these great drawer stacks that originally were bought for storing my fabric in our house in California.

DSCN3378They are nice enough looking and they have nice deep drawers for storing all my little collectibles.

DSCN3379

Because, you see, after many years, my oldest sister had litterally done nothing to the dollhouse that my Dad built. In fact, it was sitting in her basement and with her kids running through, they had actually broken some of the porch and its railing. I had been visiting for a holiday and made a remark about it and my sister said that I should have it, that she didn’t have the time or patience to work on it.

Now the next hurdle was getting this monstrosity to California. A long story short, my parents drove it out in their van when they came to visit. Yowza!

Believe it or not, we had to turn around and move it back to the Midwest – Kansas City – when we moved in 2004. This time we had a shipping place build a custom crate for it and it went on the moving truck with all of our worldly goods.

It took awhile, but it was finally unpacked and moved into the little alcove. Over the years, I have slowly collected materials, furniture and all sorts of great stuff. I painted the house, made a couple of changes to the setup of the house (like turning ‘servants quarters’ into an additional bedroom.

I’ve been thinking about my pledge to finish all the projects that I have started and I’ve done pretty well. I have spent a couple of days, on and off, looking it over and taking photos and making a mental inventory of the supplies, crafts and furniture that I have. Trying to figure out if I have the umpfh to actually get it finished.

The only issue that I see, is that this behemoth is in the basement and all my tools and most of the crafting tools and materials are on the first floor. And the sewing room and fabrics are on the second floor. That would entail a lot of stair climbing… I am going to have to think about the logistics on this one.

In the meantime, here are a few photos of the house in its current state. It was a little tough to get a shot of the front, but you can get an idea of how big the house really is. Oh, and the trunk under the table is also full of supplies for completing the dollhouse.

Oh and FYI… this house is the generally accepted standard of dollhouses, in 1:12 scale.

DSCN3365Couple of other notes, my Dad had actually built little doors, windows and staircases, which I have since replaced with more modern versions.

DSCN3376

The little photo book in the photo below are some of the original photos my Dad took while building it. I need to scan in those photos and share them with you.DSCN3377So, there lies the project. Will I finally get around to finishing it?

julie

Sewing Room Update: Finally Finished!

2014-10-27 19.52.50Well, I say “finished” but is anything ever really finished?

So, way back I showed you the new cabinet added to my sewing room. Because it came with a plain front – rather than the beadboard finish that is on every other cabinet in the room – I attempted to change the doors on this new cabinet to match.

At first, we tried to use the thin sheets you can get from any hardware or big box store.

First we cut them to size for each panel:

2014-10-12 13.15.14

2014-10-12 13.15.20

Then we slathered on the glue, placed the beadboard and then weighted it down with whatever we had in the garage. You can see we used paint cans, a small anvil – even boxes of Diet Coke.

2014-10-12 13.38.25

2014-10-12 13.38.30After leaving it overnight, I came out the next morning to find that the glue hadn’t ‘stuck’ to the door panel, only the beadboard. Back to square one.

I did some investigating and ran across a wallpaper that looked like beadboard. It couldn’t hurt to try, right? I ordered one roll and waited. It finally came and attempt number two was started.

Since I wasn’t using much, I opted for premixed wallpaper paste. Using a four inch roller, I slathered it on heavy.

2014-10-22 18.39.42

Rolled the wallpaper on top and smoothed with my hands. Then using a sharp blade, I cut the piece to size using the edges of the trim.

2014-10-22 18.36.30Wiped up any excess paste…

2014-10-22 18.37.11

…did all three panels the same way…

2014-10-22 18.37.24

And here’s how it looked. Left it to dry overnight and went to sleep with my fingers crossed.

2014-10-22 18.36.12

Here is both doors (three panels):

2014-10-22 18.40.05

Came out the next morning and it looked great! Yay! However, as I kept looking at them, I felt like something wasn’t quite right. The bounding trim was very glossy but the paper had a matte finish. I thought I would just set them up and spray paint them glossy white.

Good idea, except the paper never really dried. It was just sort of sticky. In a room where dust and material fragments and threads would be everywhere, I knew this wouldn’t be good. I opted to spray it with a glossy clear sealant. Now, there was a chance here that this would only make things worse and not resolve the issue. But I figured I could just stick The Kid in the truck and point him in the direction of IKEA and get him to buy replacement doors. It was worth a try.

And it worked! Next morning the stickiness was gone and the doors were all shiny! Next step, installation.

2014-10-27 19.52.50

Doesn’t it look like we bought it that way? I love this idea and may be looking for more ways to use this!

A couple more pics of the new cabinet and some of the other changes as a result:

2014-10-27 19.52.37

Added some more “buttons” and one still not up yet:

2014-10-27 19.52.57

New shelf along the ceiling line… those boxes hold so much! I have completed quilt squares and lots and lots of cut pieces just waiting to be turned into more quilts.

2014-10-27 19.53.09

Had to turn the button board vertical to fit. Had to move some other pieces, like the tack board, to another part of the room. Added some new things as well to the mix, such as this “puzzle box” of sewing attachments made by Singer in the early part of the 20th century.

2014-10-27 19.53.41

Here is where the tack board went. The top is a photo of The Kid when we had just adopted our puppy.

2014-10-27 19.53.31

Here is an older shot of the cabinets along the back wall and turning up to the window. You can sort of make out the beadboard fronts.

DSCN0186

Okay, now that this is done… I need to turn my attention to the third stall of the garage. It is where my sports car needs to be housed during what we expect to be a pretty snowy winter. I need to get the STUFF either done or out of there. I really just want to play in my sewing room… I just bought that new embroidery machine and can’t wait to get started. But first things first.

Julie

Wonderful World of Paint Stir Sticks

A while back I ran across some decorating schemes using paint sticks. I’ve been using paint sticks for many things, from whole projects to repair. The one I am going to show you today was actually The Kid’s idea. He came up with the idea and did all the work. I am so impressed, and happy too.

DSCN2386See, this is how I’ve been storing my glass paints. I started with those tubs, left over from cookie dough, but I soon filled them up and expanded to a small cardboard box. But when that overflowed, I knew I would have to do something a little more ‘constructive’. I started talking about it with The Kid, mentioned that I had a few dresser drawers that might work, but left the design and build to him.

And this is what he came up with:

DSCN2387This is a bunch of paint stir sticks. Lots of cuts and glue. But this is so cool! I loaded it with the paint bottles head in, so that I could see the color from the bottom. It also keeps the glue at the tip, which is handy since you’re not supposed shake this paint, so keeping the paint at the tip makes it easier to use right out of the box.

DSCN2388

I buy paint from Home Depot constantly, so I don’t feel bad about taking a handful each time I go it. You can see the branding in orange paint.

DSCN2390

Here it is loaded up. The dividers are placed with just a hint of a downward angle, to keep the bottles from falling out when moving it. He added a handle to the top to move it easily.

DSCN2392

This is a little chart that I put together (work in progress) that shows all of the different colors of paint dry. I have found DSCN2393that this is essential, as many of the colors look nothing like you might imagine they would be dry. I have had to remove some paint on a couple of projects when I found that the color dry was nothing like the color wet. I have a list of the colors and their numbers that gets stored behind the frame. Its an interesting piece of art all on its own, I think.

So, I had promised to write a few posts about what I use paint stir sticks for. This is the first. I also used them a lot when building the doll house, especially in the kitchen. I glue them side by side and then use them as thin, yet strong boards.

In thess photos, the fronts of the bottom cabinets and the little cabinet next to the fridge were built using the stir sticks. Also the pub table and stools. They are made of 100% pine, so they are wood, and can be used in any way that one would use wood. At least in small portions. Which when working in the scale of doll houses, is perfect.

DSCN1877

DSCN1881

The little wood box next to the fireplace was another project. I’ve made numerous and varied sizes of boxes, sometimes just to hold supplies.     DSCN1893

The doors and shelves were a perfect place to use the paint stick wood. Nice and thin, yet strong and paint-able. The perfect size when working in miniatures.

DSCN1899

Some more shots of the wood as it was used:

DSCN1875

DSCN1876I find that whenever I go to Home Depot – which is often – I stop by the paint department (if I am not already going to that department specifically) just for a handful of sticks. And sometimes I even use them to stir paint!

We’re having a wet and cool stormy day here in the Midwest and I am thinking that not much is going to get done. At least not anything outdoors.

julie

 

 

PS…for those interested, I am not being paid for nor sponsored in any way for the mention of any products or stores in this post. I just like the way that these particular products work and want to share with you!

Doll House is Ready For Delivery

Last few details have been completed and the doll house is ready for delivery.

DSCN1498You may notice that there is a small gap between the “attic” and the rest of the cabinet. That’s simply because they are two parts, created that way for transport. Once it arrives at my grand niece’s home, I will put them together and they will fit tight. Really tight. I’ll post another few shots once it has been assembled.

Before PicsThese are the before shots… sorry about the quality of the pictures. But it does give you an idea of what I started with. I did a coat of primer and realized that it wasn’t going to be the optimum solution, so I opted to cover the box with something that resembled siding. I came up with the idea of using bead board, the kind that comes in 4′ x 8′ panels. All I needed to do is turn it sideways… and viola!, instant siding.

Siding House2Here are some shots of the process… and yes, the Kid was dutifully helping (adding trim to the doors). Looks great!

There were a lot of steps to the process and not sure exactly which ones happened first, so I’ll just post a bunch of the photos…

DSCN1434I added a drawer at the bottom, to hold odds and ends. Modified a drawer rescued from another dresser to fit, added small stoppers to keep the drawer from hitting the back and possibly knocking it off.

DSCN1456 DSCN1457 The remaining space was divided in half and added shelves; one above the drawer and one in the middle.

You can see how badly the primer was doing on this particular surface. Anytime you would touch it, the primer would scrape right off.

On the inside, I did do several more coats of primer and then a couple of coats of paint. I hope that it withstands the play it will get.

Next step was building the “attic”. It was taking shape as a ‘house, but needed just a little more to really do the trick. That’s when I came up with the idea of having an attic. Also allows for a little more play area.

DSCN1455 DSCN1454 DSCN1459 DSCN1458  I added the two vertical pieces on either side to keep it stable as it sat on top of the house. With just a tiny bit of sanding, it will go on with some strength, so there isn’t any danger in it falling off or being pulled off. Also why I opted to not photograph it with the attic in place.

I used actual shingles on the attic, cutting them down to appropriate size and nailed them on. Small wood pieces were painted white to be the trim.

DSCN1468For ease in working on this monstrosity, I added wheels. Made is so much easier to move around. All the layers were starting to add real weight to this thing.

DSCN1465

DSCN1436I built the front door in layers. I decided that rather than put handles on the doors to open it, I would place a front door on it. Made it feel more like a dollhouse. And if things got messy, my niece could just close the doors until she had time to straighten things up.

DSCN1437I found this little door knocker at my local Habitat for Humanity ReStore. I used this knob I had and spray painted them both the same color silver.

I stumbled on all the colors, simply based on what was available. The outside was painted gray because I had nearly a full gallon of it. I like the way it turned out. The door, painted blue, because I had two full cans of blue spray paint. 🙂

DSCN1505I created little windows for the house, spray painted white. I had thought about putting some sort of photo behind each one, but couldn’t come up with anything that I really like. My last ditch effort was to put a photo of mini-blinds, but didn’t like that idea either.

DSCN1438

So they just went on with nothing. I did create little windows boxes for the front two windows, also painted blue. Added some miniature flowers in purple.

DSCN1504

DSCN1506

DSCN1494

DSCN1498Okay, almost done. I added some vinyl tiles to one level and created a checkerboard pattern in red and white for the bottom level. I covered it with a large piece of plexi used to diffuse florescent lighting. I found a piece at Home Depot that had a crack at one end, but a piece large enough remained. The wonderful folks at Home Depot gave it to me free of charge. Gave the flooring an unique look.

Short of that, the doll house was complete. I added the stove, refrigerator and sink unit I blogged about earlier. Added a small storage unit and made a simple bed for the upper floor. And with that, the project was complete. I’ll let the photos do the talking:

 

DSCN1506

And some photos of the interior:

DSCN1500

DSCN1496

Here are a few more close up photos of the inside:

DSCN1502

DSCN1495

DSCN1501

DSCN1503And with that, this long project draws to a close. I think that we will deliver this in the next day or so. And then I can work on mine! Although mine will be done in a much longer time frame. No hurry to get it done, ya know!

I hope you enjoyed this and thank you for stopping to take a look. Will post more photos after it is delivered.

And keep making beautiful stuff, just for the sake of it!

julie

%d bloggers like this: