Dollhouse Reveal: The Dining Room (#11)

Another of my favorite rooms. I personally could not have a room with so much black, but I really love the way it turned out.

DSCN4943The inspiration for this room was the fabric that become the large octagonal rug in the center of the room.DSCN4944Right after that, I ran across the black and cream dining room chairs, and I knew the color direction that was going to dominate this room. I ended up having to buy two sets and one of the tables went into the sewing room as the cutting table. I used the other in the middle with a large round. Lots of seating for family and friends!DSCN4945Would you believe that chandelier is actually a car air freshener?  I had to actually shorten it, as when I initially placed it, it almost touched the floor.DSCN4946The table cloth fabric was another ‘stumbled upon’ fabric. I had initially just planned to use a crisp white table cloth, but when I saw this fabric I knew I had to use it. (Chocolate cake ready for desert for guests!)DSCN4947The china cabinets are something I picked up a long time ago seriously cheap and I ended buying about a half dozen of them. They all varied ever so slightly from one another, but the two I used were very similar. Painted black and filled with various china pieces and silver and copper work, they make a nice compliment.DSCN4948I tried using a different wall treatment in this room. For the most part, it turned out okay. The wainscotting is really siding for the outside of the house, but I like it used this way. I also used this gorgeous scrapbooking paper for the upper portion of the wall, rather than paint.DSCN4949The floor was the originally purchased real-wood floor that had been added to the collection somewhere along the line. I could actually cut it with scissors it was so thin, but took a nice oak stain.

The window treatments are the houndstooth black and creme fabric with off-white sheers. This is another set of curtains that don’t quite hang right and there is a part of me that wants to replace. If I used the same fabric as the table cloth, would it be too much? The valance has fabric that was leftover from the rug and I was able to snip out a section that doesn’t give it away too much.

So, that concludes the tour of the dining room. Come back for more room reveals.

julie

Want to see all of the rooms? Use these helpful links:

Dollhouse Flooring: Lots of Options

In the process of completing my dollhouse, I found that there are many options when it comes to flooring. I think that my Dad’s intent is that all of the rooms would have wood floors, but then when he originally built the house it was supposed to be a early 1800’s house (complete with servants’ quarters). I, of course, updated the style of the house to be contemporary; I likened it to actually remodeling a real house to standards of the day (bathrooms, running water, electricity and a modern kitchen).

One thing I learned the hard way was the doors and door trim. I think even before the flooring goes in the doors should go up. I did it the hard way and now with trying to get the pre-made doors installed, I am finding that the openings are being blocked by high floors – especially where I used miniature tile. Thankfully, The Kid is tackling this job for me.

So back to floors. I have used a wide range of flooring options and even created a few that I didn’t use. Originally, the kitchen was to be a pale shade of yellow, as I had purchased this awesome fifties’ style dining table and yellow chairs.IMG_4157As you can see, there were a number of flooring options, including the checkerboard pattern in yellow. In the end, I used a red and white checkerboard pattern, which is reminiscent of the entry way and living room black and white.IMG_4155The kitchen is laid with samples that I ordered from WilsonArt’s website, but the black and white is actually individual tiles that I got from Home Depot.IMG_4153For the ‘sewing room’ I also picked up some green variegated tile samples and cutting to squares and then laying them in the checkerboard pattern.

I meant to mention this wonderful person’s name that I met in Home Depot and am just now getting around to writing the post. If you’re ever in the Kansas City area, look for Cheryl Lupton, who spent time with me brainstorming about ideas for flooring. She had inexhaustible enthusiasm for the challenge and loved the time we spent together! (Hi Cheryl! Sorry it took me so long!).IMG_3930Anywho, Cheryl was the one who showed me the tile samples that they keep in the store. These are about 2″ x 3″ rectangles and I just cut them into squares and then adhered them with E-6000 glue. I was going to visit several Home Depots so that I didn’t take all the samples displayed, but wonderful Cheryl told me to take all I wanted! Yea! Saved a bunch of time, driving and effort.IMG_3929She was also the one who told me I could order samples of the laminate online as well. And I am going to share that with you here: http://www.wilsonart.com. Just browse through all of the different types of laminate and once you find something that interests you, click the link to order samples.IMG_6154There is a limit of some of the colors or styles and you can only order 50 samples at a time. I think I went a little overboard when I found out, and ordered way more than I could ever use. (I am still trying to come up with a project that will use them!) I had ordered lots of pink samples and one in particular had a woven appearance and the right shade of pink. So, two of the laminate samples made up the nursery floor.IMG_4147So, laminate samples for the kitchen, living room/entry way, sewing room and baby’s room. Somewhere along the way, I had a package of “real wood” miniature flooring from HouseWorks. IMG_4085I wanted the dining room to have a beautiful wood floor and after taking the largest piece for the dining room, there was enough left to piece together for the attic home office. Sort of makes sense that one would do a patchwork of what is available for the floor in the attic. It turned out pretty good, I think!IMG_4149So, for the two bathrooms, they got tile. Some time back, I ran across these large packages of assorted colors of mini tiles to be used for making stepping stones. By buying three of them, after sorting I ended up with a nice selection of colors and about half of it was white.IMG_3967So in one bathroom, the floor and the shower walls are actual tile! Blue and white went on the floor in an everyday checkerboard pattern with a white row of tiles around the edges.IMG_4151

Now, the other bathroom, which is also the laundry room, is done in green and white tiles. I didn’t have enough of any one shade of green, so I used three different shades of green alternating with white. Viola!IMG_9260You have no idea how difficult it is tiling with 3/8″ tile! I had some issues keeping them level and straight!

Okay, that takes care of eight of the 12 rooms. For the boy’s bedroom and the master bedroom, it was always in my mind to use carpeting. Again, I had some packages of dollhouse miniature carpeting from a company called ‘MiniGraphics’ that had been purchased somewhere in the past 25 years. When I purchased it, it was for the living room along with some light blue sofas, so it must have been sometime in the 90’s. I had also made curtains, blue and yellow plaid over sheers. So much different than what I ultimately decided to use.

IMG_4156So, off to one of my many jaunts to JoAnns. I knew what I was looking for but not sure if I would find it. But of course, I did, and the tight weave and low plush made it the perfect faux carpeting. A deep grey color would work as a perfect neutral, although I only needed it for the two bedrooms. Bought enough to carpet every floor in the dollhouse!

IMG_4150So, we’re up to ten of the 12 rooms with the flooring complete. The hallway in the upstairs was one that I hadn’t planned for and the floor plan change ended up with quite a bit of square footage (inch-age?). This was a chance for me to experiment a little and having watched an online video about using Popsicle sticks and so set off to implement this for the hallway. I cut different lengths and then laid them down using the E-6000 glue, then staggered the lengths and used a wood putty to fill in any spaces. I then stained them using a medium oak color and then put two coats of clear polyurethane to seal the color. Turned out better than I expected. If I did this again, I think I would buy coffee stir sticks – they are a bit more narrow and would fit the scale better.IMG_4152(What do you think of my little clip board? Also made from laminate!!)

The last room is actually a storage space in the attic and it will remain without a finished floor, much like real attics.

So, there it is. I hope that this has helped in some way. Sometimes you just gotta jump in and do it and figure it out as you go.

Thanks for stopping by! Come back when I am finished and unveil it! It’ll be soon!

julie

Save

Dollhouse: Getting Closer to Being Done

I seem to spend more time on the dollhouse rather then writing about the work being done. Much of the work seems pretty routine and, well, obvious, so I am not writing about everything I do. If you ever have questions about something that I’ve done, please ask and I will elaborate. Sometimes what seems straightforward to me is confusing to someone else. And vice-versa.

So much of the work done over the past couple of weeks has been about getting the basics done so the furniture can go in. Of course, the kitchen is primarily “basic”, so a lot of work has been done there. I’ve also done a lot of prep for the doors, floors and trim. I can see the light at the end of this tunnel!IMG_4078The greatest amount of work (and fun!) was the kitchen. I had ordered all of the cabinetry in kits, that is, I had to assemble it all. To make sure it all fit correctly, I made templates for both the walls and floor so that it would fit in like a puzzle.

I used pieces of laminate that I had ordered from Wilson (ordering info further down the page). The way it worked out, that back piece acted as a “plate” that the cabinets could be glued to and then placed into the house. And as a bonus, it became the backsplash, a jaunty little fiftie’s motif in red, white and turquoise.

IMG_4102This was the short “stove” wall… The Kid created the range hood from stainless steel. Initially it was a little short, so I added the little cap at the top.DSCN4896A shot of the long wall with kitchen sink and ‘fridge. I still had to cut the section for the window.IMG_9853The floor is actually another pattern of laminate sample. The only issue I had working with it was weighting the flooring down as it dried. You can kind of get the sense of the air pocket under the floor in the photo above.

IMG_4125With much of the dollhouse complete, I finally moved it off the kitchen island back in front of the fireplace. Much of the window treatments are done, furniture found and purchased, and lots of little details being worked on.

One thing I goofed on was adding the baseboards before installing the doors. I was waiting on the purchased hardware to arrive and just got ahead of myself. Now that it has arrived (and changed from brass to silver finish), I’ve prepared all the doors for installation. I think this is going to be a bigger deal that it should, considering that I think I will need to trim the baseboards to fit the doors.IMG_4124Larger than most starter dollhouses, it requires quite a few doors (and the two IMG_4123inside/outside doors are already installed)! Here I was adding the door knobs. As I mentioned, the pre-purchased door handles were all brass colored. Laying them onto a sheet of poster board and securing them for painting with a glue stick.

You can also see a few of the miniature trivets that I purchased off the internet. Since the kitchen is red and white with a pop of turquoise, some of the trivets had to be sprayed painted.IMG_4128

The doors between the dining room and kitchen were designed to open together, instead of knobs, I made push plates. I cut these from metal-look laminate as well. I had several selections to choose from, here are a couple of the sample tiles.

They really look like metal!

While I was at it, I cut kick plates for the front door as well (to be installed at a later date).IMG_4126Things are progressing and am quite close to adding the details. And then a gigantic photo shoot will occur to show off the whole thing.

Down the road a little ways, I am planning to add clear plexiglass doors to keep the house from getting dusty. Initially I thought I wanted to finish it and then never touch it again, but instead of a single sheet on the back of the house, I decided to construct two larger doors for adjustments or so new items can be added. I am also going to place a clear “wall” onto the back of the boys’ room.

When I started the project of completing this dollhouse, I vowed to work on nothing else so as to not distract me from the task at hand. I have a little bit of crafting ADHD and tend to easily get drawn into other projects and consequently end up with a lot of unfinished projects. Now it seems that I should be finishing up the house at about the same time I will be going back to work! I will work furiously to get all the little details written about in the next couple of weeks.

And please! I love to share my projects and the way I went about doing things. But I love to hear from others as well… comments and questions are the icing on the creative cake!

julie

Miniatures, Doll House and Dreams

So having gotten most of the projects that I had started (over the past year) completed, I am going to take advantage of avoiding the cold and work inside. On my dollhouse. With the help of my son and his best friend (my other son from another mother), the dollhouse has been safely moved and placed into its working spot. I expect that I will work on this a long time: until I either get finished or I get sick of working on it. I am finding working with 1:12 miniatures is a lot more tedious and time consuming than the 1:3/1:4 miniatures for the 18″ dolls (American Girl-style dolls).

It seems to take a lot more time and energy to do the smaller scale. Not to mention it seems to cost more! What I have been working on so far is getting a rough idea of how I want to proceed with each room. Originally I thought I would approach it on a room by room basis, but found that as I worked through the furniture and decorating needs, it seems to make more sense to more than one at a time. I mean, like when I pick up the flooring needs for one room, it just makes sense to get what I need for all the rooms that have similar needs.

I have numbered the rooms so that when I write about the rooms, I can also refer to the room number in addition to what I am calling the room.

 

dollhouse-numbered-roomsSo the rooms are designated to be:

  1. Attic Sewing Room
  2. Home Office
  3. Second Bathroom & Laundry
  4. Attic Storage
  5. Master Bedroom
  6. Master Bath
  7. Hallway
  8. Boy’s Bedroom
  9. Baby Girl’s Nursery
  10. Living Room and Entryway
  11. Dining Room
  12. Kitchen

So, yes, this is a large dollhouse and now takes up a large chunk of living room real estate:

dscn4885But is always in view to keep my creative juices flowing. I’ve begun planning floors and colors and the necessary cabinetry for the kitchen as well as stove, refrigeration and cabinet with sink and a microwave. Rough estimates are in the two hundred dollar range! And the kitchen is one of the rooms that requires copious amounts of extras… including a diner style booth and table and food and dishes. I bought a set of flatware tonight for a whopping $1.67! But, WOW!, it all adds up.

I have a couple of furniture pieces that have to be finished and written about still. I just couldn’t resist giving y’all a sneak peak at the project that is going to be consuming much of my time in the next year!

julie

A Miniature Miniature

Hopefully that title grabbed your attention!

I am finishing up a lot of bigger projects as my garage has now been turned into some kind of storage place for cars! Go figure!

I am planning on working on the dollhouse that my Dad built for me many, many years ago. I had always begged and pleaded for a dollhouse and when my Dad became ‘sorta retired’ and started to work a lot more in his workshop, he finally built one. And it was huge! And, I found out later, it went to my oldest sister. Sigh.

I had heard something about it as I was living in California and my parents were in Iowa. My sister lived in the same town. Made sense.

Later, my sister wanted to return the dollhouse to my Dad but I jumped in and claimed it. My Dad would later drive his van with the dollhouse out to California. It was the only way he felt comfortable delivering it. And then when moved from California to Missouri, I had a shipping company build a professional crate to hold the dollhouse when we used a moving company to move us.

But I digress. It has been sitting in a special place in the basement for about ten years now. The most I have done is paint the house white and buy tons of materials for it. Now I want to spend this winter completing it. I am getting The Kid and his buddy to carry it up from the basement to a space here in the living room.

So, on to today’s activity. I’ve built a dollhouse for the dollhouse. 🙂

dscn4863

Going through all of the ‘stuff’ that I had purchased over the years was miniature furniture, scale 1:24, whereas the big dollhouse was 1:12. So, while watching television, I worked on the little dollhouse.

I started with a little cabinet that I had bought. It was a piece that had two levels and an “attic”. I removed the doors and the front facing piece that was in place of the attic’.

I used scrapbooking paper for the walls, floors and ceilings. I was fun to try different patterns together and it was simply a matter of gluing the paper with white glue.

Most of the furniture was brown and I did little to alter it. I did paint the stove and the old fashioned telephone black and I cut down the toilet from one that had an overhead tank to something more modern and to get the sink it there, I had to shorten the base. All of the little pieces such as the lamps and the pitchers, were glued down. Well, the pieces are glued down, since it isn’t for active playing.

I also added “siding” to the house, using Popsicle sticks and painted. The back roof was done with the larger rounded edge of ice cream sticks and stained.

img_3902It is to go into the little girls’ room in the larger dollhouse. This one? Stands about five inches, which in 1:12 scale, it would be about five feet tall.

Happy to answer questions, if I can. I will leave you with more photos:

img_3898Many of the pieces had to be placed into the house using long tweezers and some of the smallest pieces didn’t have much space for glue… the little towel rack kept falling out of place and even… I think it came out okay.img_3900There are more pieces available and I may be looking to create another mini-miniature dollhouse.img_3904The bedroom has a blue blanket (included in the set) but I added pillows – just a couple of very small pieces of white felt. There is a mirror setting on top of the dresser.img_3900The kitchen boasts a water pump and a sink vessel. A lamp sits on the dining room table.img_3898The little dining room table was actually two round tables. I removed the tops and cut a very small oval table from the end (the thinest part) of a wood wedge and just glued the two sets of legs to it.dscn4864Some of the wonderful touches are the roll of TP in the bathroom, as well as a towel rack.dscn4863I wish I could tell you the brand or where to buy these sets, they must have been in my storage for some time. I really don’t recall at all. My son thought that I had picked them up an estate sale… over the years, I have always been on the look out for pieces, materials and supplies to complete the dollhouse.

julie

Preparing for 2016: Printable Calendars

I ran across a gorgeous printable for 2016 calendars. I’m generally not much of printed calendars, I am a devotee of my iPhone and computer calendars. But when I saw this calendar I knew I had to print this one.

My first thought was to print these one to a page and then flip them over and print an image to the other side. Unfortunately, my printer setting was configured to print on both sides, so I ended up with that printing first. Then I printed out another set, this time one to a page.

I took that set and then flipped them over, found the images I wanted to print on the other side and sent those images to the printer. Another oops – man, do I need to be more attentive when I am printing – and this time I accidentally printed the image over the top of the calendar. But I caught it after printing just four and realized that the image was the same size as the calendar… and looked pretty cool! A nice oops for a change! 🙂

DSCN4125Tough photographing the calendars, but these are very suh-weet! Trust me!DSCN4126I am going to have these bound on the side, I think, and use these in my office.

So, back to the second attempt. Finally, with the 12 pieces of card stock printed with the calendar, I fed them through the printer so that the image printed on the other side.

DSCN4128

That worked well. I think that I will have these bound at the top and use these in my kitchen/dining area. Not sure where I found the images – I have a collection of over 3400 images that I’ve collected over the years to cycle through as my screensaver images. But I have them in a series of colors – about fifteen in all – and so they were perfect for these calendars.

DSCN4127You can find these free printables over here at Delineate Your Dwelling. Spend some time checking out this great blog!

I can’t believe that I am actually ahead of myself at this point!

julie

%d bloggers like this: