As you may know, I have been putting in a lot of time and effort to making my garage a better place to work and be able to park my vehicles inside. I have started a new job and it seems that a lot of my time and thinking are spent there and not at home and in the garage.
We did quite a bit of work this weekend, but still not finished. From this photo, you can see that I was able to get at least one car into the garage. We’re smack dab in the middle of tornado season and I just finished paying off my little sports car, so I was happy to have it garaged.
I did pick up the grey cupboards and got them installed, along with the butcher block counter that came from a free work table. I loved the countertop, but didn’t want the open space below, it was much too easy for things to just get jammed in there and look messy and dirty and filled with saw dust.
The top wasn’t long enough to cover both cabinets, so I made an extension. I cute 2 x 2’s into 30″ segments and glue and screw them together. Then I used a concoction of glue and saw dust to fill into the spaces left from the slightly rounded edges of 2 x 2’s and let them dry. The pieces all assembled were a tad too shallow to match up with the existing countertop, so I glue the pieces to a sheet of 3/8’s luan, which actually stabilizes it as well. I bought another tool that I’ve been wanting, a belt sander, to make the job of smoothing it all a tad easier.
The piece was laid end-to-end with the butcher block and then glued. The entire top was bolted to the lower cabinet and inset to keep a smooth surface. I opted to cut off the corner as I could easily envision bumping it with my hip every single time I came into the garage. 🙂
This week, The Kid has been tasked with sanding the existing butcher block top down to bare wood and then I will put a few coats of polyurethane to give it a nice hard surface that should endure. And it should look pretty sharp too. I am hoping that by the end of next weekend, this will be completed.
At the right end of the work surface is a 10 foot high storage. The space not easily accessed holds less used items and the center I made into a paint station. The paint rollers are stored on a dowel placed end to end inside the cabinet and one cubby hole below holds brushes of all kinds and roller pads. The lower cabinet will house the shop vac and all of its accessories as well as some other materials that just are unsightly. Still room at this point to use to store tools and materials.
At the right of the photo in the smaller garage stall are two (free) shelving units, one holds tools boxes and the other holds the one gallon paint cans. The quart cans, the sample jars and spray paint are all house in one of the existing cabinets the line the back of the the garage.
At the end of the white shelving units are a little workstation. I picked up this smaller sized cabinets I picked up free from CraigsList a year or so ago. On top is a piece of salvaged Corian countertop and then collected drawers are utilized to create storage for much used materials, like sandpaper for the sanders.
This is a quick shot of the third stall, currently packed with projects and more materials. Once again, from CraigsList, I got the carpet squares free and it pretty much carpeted this side of the garage. It will serve as a nicer place to showcase finished items and they can be parked on once winter comes. Heck of a mess, right? I know it is driving me crazy to not have more organization here!
I did manage to get the dead trees in front of the house replaced as well. Hopefully these will fare better than the previous ones, I even used Miracle Grow potting mix to plant them.
The Kid has been working on his own project as well, this is going to be a metal forge. A couple of weekends ago, he and I walked along the train track near the silos downtown and picked up pieces of coal that had escaped from the coal cars. We ended the night getting what we needed, but was escorted off the premises by two of Kansas City’s finest. I guess that trespassing around large train cars is bad or maybe dangerous… but I guess I can understand it from the railroad’s point of view.
Once The Kid has made some progress, I will let him do a guest blog post to explain what he is making and how to do it. Again, for him it is good skills to have and to know that it isn’t something that he would want to do for a living. I keep telling him that he is better off working with his head than his hands and his back.
Just as soon as this garage project is done, I will have photos up here. Thanks for hanging in there with me!