Sewing Room Update: Finally Finished!

2014-10-27 19.52.50Well, I say “finished” but is anything ever really finished?

So, way back I showed you the new cabinet added to my sewing room. Because it came with a plain front – rather than the beadboard finish that is on every other cabinet in the room – I attempted to change the doors on this new cabinet to match.

At first, we tried to use the thin sheets you can get from any hardware or big box store.

First we cut them to size for each panel:

2014-10-12 13.15.14

2014-10-12 13.15.20

Then we slathered on the glue, placed the beadboard and then weighted it down with whatever we had in the garage. You can see we used paint cans, a small anvil – even boxes of Diet Coke.

2014-10-12 13.38.25

2014-10-12 13.38.30After leaving it overnight, I came out the next morning to find that the glue hadn’t ‘stuck’ to the door panel, only the beadboard. Back to square one.

I did some investigating and ran across a wallpaper that looked like beadboard. It couldn’t hurt to try, right? I ordered one roll and waited. It finally came and attempt number two was started.

Since I wasn’t using much, I opted for premixed wallpaper paste. Using a four inch roller, I slathered it on heavy.

2014-10-22 18.39.42

Rolled the wallpaper on top and smoothed with my hands. Then using a sharp blade, I cut the piece to size using the edges of the trim.

2014-10-22 18.36.30Wiped up any excess paste…

2014-10-22 18.37.11

…did all three panels the same way…

2014-10-22 18.37.24

And here’s how it looked. Left it to dry overnight and went to sleep with my fingers crossed.

2014-10-22 18.36.12

Here is both doors (three panels):

2014-10-22 18.40.05

Came out the next morning and it looked great! Yay! However, as I kept looking at them, I felt like something wasn’t quite right. The bounding trim was very glossy but the paper had a matte finish. I thought I would just set them up and spray paint them glossy white.

Good idea, except the paper never really dried. It was just sort of sticky. In a room where dust and material fragments and threads would be everywhere, I knew this wouldn’t be good. I opted to spray it with a glossy clear sealant. Now, there was a chance here that this would only make things worse and not resolve the issue. But I figured I could just stick The Kid in the truck and point him in the direction of IKEA and get him to buy replacement doors. It was worth a try.

And it worked! Next morning the stickiness was gone and the doors were all shiny! Next step, installation.

2014-10-27 19.52.50

Doesn’t it look like we bought it that way? I love this idea and may be looking for more ways to use this!

A couple more pics of the new cabinet and some of the other changes as a result:

2014-10-27 19.52.37

Added some more “buttons” and one still not up yet:

2014-10-27 19.52.57

New shelf along the ceiling line… those boxes hold so much! I have completed quilt squares and lots and lots of cut pieces just waiting to be turned into more quilts.

2014-10-27 19.53.09

Had to turn the button board vertical to fit. Had to move some other pieces, like the tack board, to another part of the room. Added some new things as well to the mix, such as this “puzzle box” of sewing attachments made by Singer in the early part of the 20th century.

2014-10-27 19.53.41

Here is where the tack board went. The top is a photo of The Kid when we had just adopted our puppy.

2014-10-27 19.53.31

Here is an older shot of the cabinets along the back wall and turning up to the window. You can sort of make out the beadboard fronts.

DSCN0186

Okay, now that this is done… I need to turn my attention to the third stall of the garage. It is where my sports car needs to be housed during what we expect to be a pretty snowy winter. I need to get the STUFF either done or out of there. I really just want to play in my sewing room… I just bought that new embroidery machine and can’t wait to get started. But first things first.

Julie

Still Keeping Busy at Work! But Getting Some Things Done at Home…

This past weekend was interrupted by a request from The Kid to go ‘abandoned house hunting’. Seems he has been collecting a few military surplus items and really wanted to go camping, but now with the overnight temperatures falling down to the 40’s, I am thinking it is a tad too cold for overnight. As a compromise, we stayed in a 4 star hotel! Now, that’s my kind of camping!

This hunting trip was unusually disappointing… most of the homes we ran across had been abandoned some time ago, some were even a little too scary to go into… the biggest thing I worry about is having the floor give way on us as we explore.  We did stumble onto one house that had their tornado shelter in amazingly good condition, although it seems that it had already been scavenged. It was nice to spend some one on one time with my teenager, though, and he did most of the driving.

Short of that, there wasn’t much time for anything else. I did manage to coerce some small things out of the Kid in order to be able to justify the trip, like this wonderful installation in the garage.

DSCN2730

We found the cable kits at IKEA last weekend and I picked up a couple just because I knew they would come in handy somewhere. And here it was! I am still stomping my feet to get everyone to put tools away after using now that we’ve completed the garage makeover, and I figure this might just make it a little bit easier. If you can just reach over and hang something, that has to be easier, right?

We made the first attempt at placing beadboard into fronts of the cabinet doors for the new cabinet in my sewing/crafting room, but sadly, it just didn’t work well. The beadboard comes in these huge sheets and it was just too thick to a) get good adhesion and b) look nice. Thankfully, it was easy to pull the pieces off and clean up what little glue was left behind.

I found a faux beadboard wallpaper at Home Depot (online) so, now am waiting its arrival for ‘take 2’. This is what the online ad looks like, so I am hopeful.

Screen Shot 2014-10-14 at 2.31.52 PM

This entire wall of cabinets already in the room have beadboard fronts, so I want this new cabinet to match. (BTW, those cabinets store 95% of my fabric stash, most still on the original fabric bolt). I love that I was able to do this when we built this house.

dscn0186

I have also been slowly working on the two Singer featherweight sewing machines I bought via eBay. I am combining the best of the two into one working on with its beautiful bentwood case restored and varnished and poly’ed. Very close to having those done as well. I doubt that I will sew with it, what with the four other computerized machines I have, but I just love the design and simplicity of the machines and wanted to have one. Who knows, maybe after the apocalypse, it will come in handy!

Two smaller things I was able to get done were more decorations for the sewing room. One is an “accidental” collection of sewing machine feet, some from my mother’s sewing machine, some from my machines and some that came with the the recent featherweights that I recently purchased. Some of them are so intricate that they needed to be displayed. So here they are:

photo 1I love the variety of these and most of them I have no idea what they are used for. I think the one in the upper right corner was used for making/sewing ruffles.

And the next one is something that surprised me, but these are the bobbins for the older featherweight machines. I just loved the idea! So, yes, I had to go find more. 🙂

photoOkay! Yikes, once I got going I couldn’t stop! LOL. That’s enough for today, much to do this week in preparation for this weekend.

julie

%d bloggers like this: