So, I have been doing a lot of cutting of denim. And I have finally finished the first hurdle, cutting all the harvested denim from somewhere between 200 and 250 pair of jeans. And it is A LOT of denim.
The tall stack of offset squares? Those are 8″ and that tower is more than 400 pieces! The other tall stack is 6″ squares and then of course there are 10″, 4″x 6″, 3″x9″ and of course my favorite is the 2″ x 6″ – which I like to do the braided quilts.
While I was doing all this cutting, I was also sewing, using the strange remainders once the defined sizes were cut. I love to make scrap quilts with them. Mostly I was doing 10″ squares, but also have been working on 4″ x 6″. I put all of the fabric to use though, using what is left after doing 4″ x 6″ squares by dumping them into the floor of the attic space behind my son’s room. Nothing like denim to work as insulation.
Nothing can make more threads and dust like denim though. There is blue dust all over the house!
I save everything from the jeans that I harvest: hems, pockets, seams, waistbands, belt loops and of course the fabric. The only thing I don’t use are the zippers… and I even keep the little zipper tab to keep track of just how many jeans I take apart!
So, the first project that I actually completed sewing is bottom hems. While it might make sense for you to realize, working with denim and jeans’ parts, things get heavy quick! Oh, and the other thing is that sewing denim is very hard on sewing machines and needles!
This is the result of stitching together hems:
This is approximately 80″ x 60″. Even though this is the last project I started, it was the first to really be completed. And I don’t know if I am going to leave it like this or try to add a backing and top stitching. As it is, it is amazingly heavy and because it does contain “knots” – that’s what I call the cross section of a seam and bottom hem (or waist bands or side seams that cross another seam) – that are very hard on needles and machines.
This is the next current project… this is made of scraps sewn onto 10″ muslin squares.
So, this is 10 x 10 squares that measure 10″. I’ve started the sashing between, so far I have ten strips of 10, so the next step is to create the sashing between the long strips. I could not do this without my son’s help. These are very heavy quilts! Since they were assembled onto muslin, it may not require a backing and it might be too big for long arm quilting machine, so the muslin backing may be enough.
You can see the roll of belt loops at the bottom of that photo. I was thinking that might make a unique sashing in a less complex denim quilt. Who knows!?
One thing I have learned that I want to pass along to anyone who might want to work with harvested denim… DO NOT USE STRETCHY DENIM! I cannot emphasize enough how this can screw up a denim quilt. You can see in the photo below where the stretch makes the quilt bulge or where I had to cut sections to get it to lay flat.
I wish I could go back and take ALL the stretchy denim out, but it would be way too much work at this point. I won’t make that mistake going forward!