“I Spy” Mirrors

Today’s reveal is something that I have been working on for some time. It doesn’t hurt that while preparing, it allowed me a lot of trips to thrift stores, something that The Kid and I enjoy immensely. I was collecting toys and trinkets for these mirrors:

dscn4854The vertical mirror was first (above) and then the horizontal one (below) was next.dscn4844The photos may be a little confusing as I set the mirrors up to reflect the other… but the first is in portrait and the other in landscape mode.

I started working on the ‘portrait’ mode first… and didn’t expect to do more than just this one. I had picked up a framed mirror in my travels and thought it would be fun to do this. I looked for small, fun objects and toys and used hot glue gun to attach the items. It was just a hit or miss as to what fit and looked good.

I won’t spend too much time talking about them, they are both pretty straightforward. I will mention that The Kid built the frame for the second mirror. I had so many toys that I needed to do a second one. I am keeping eyes open for more ‘stuff‘ that would allow me to complete a third.

Hope you enjoyed seeing them half as much as I loved making them!

julie

A Miniature Miniature

Hopefully that title grabbed your attention!

I am finishing up a lot of bigger projects as my garage has now been turned into some kind of storage place for cars! Go figure!

I am planning on working on the dollhouse that my Dad built for me many, many years ago. I had always begged and pleaded for a dollhouse and when my Dad became ‘sorta retired’ and started to work a lot more in his workshop, he finally built one. And it was huge! And, I found out later, it went to my oldest sister. Sigh.

I had heard something about it as I was living in California and my parents were in Iowa. My sister lived in the same town. Made sense.

Later, my sister wanted to return the dollhouse to my Dad but I jumped in and claimed it. My Dad would later drive his van with the dollhouse out to California. It was the only way he felt comfortable delivering it. And then when moved from California to Missouri, I had a shipping company build a professional crate to hold the dollhouse when we used a moving company to move us.

But I digress. It has been sitting in a special place in the basement for about ten years now. The most I have done is paint the house white and buy tons of materials for it. Now I want to spend this winter completing it. I am getting The Kid and his buddy to carry it up from the basement to a space here in the living room.

So, on to today’s activity. I’ve built a dollhouse for the dollhouse. 🙂

dscn4863

Going through all of the ‘stuff’ that I had purchased over the years was miniature furniture, scale 1:24, whereas the big dollhouse was 1:12. So, while watching television, I worked on the little dollhouse.

I started with a little cabinet that I had bought. It was a piece that had two levels and an “attic”. I removed the doors and the front facing piece that was in place of the attic’.

I used scrapbooking paper for the walls, floors and ceilings. I was fun to try different patterns together and it was simply a matter of gluing the paper with white glue.

Most of the furniture was brown and I did little to alter it. I did paint the stove and the old fashioned telephone black and I cut down the toilet from one that had an overhead tank to something more modern and to get the sink it there, I had to shorten the base. All of the little pieces such as the lamps and the pitchers, were glued down. Well, the pieces are glued down, since it isn’t for active playing.

I also added “siding” to the house, using Popsicle sticks and painted. The back roof was done with the larger rounded edge of ice cream sticks and stained.

img_3902It is to go into the little girls’ room in the larger dollhouse. This one? Stands about five inches, which in 1:12 scale, it would be about five feet tall.

Happy to answer questions, if I can. I will leave you with more photos:

img_3898Many of the pieces had to be placed into the house using long tweezers and some of the smallest pieces didn’t have much space for glue… the little towel rack kept falling out of place and even… I think it came out okay.img_3900There are more pieces available and I may be looking to create another mini-miniature dollhouse.img_3904The bedroom has a blue blanket (included in the set) but I added pillows – just a couple of very small pieces of white felt. There is a mirror setting on top of the dresser.img_3900The kitchen boasts a water pump and a sink vessel. A lamp sits on the dining room table.img_3898The little dining room table was actually two round tables. I removed the tops and cut a very small oval table from the end (the thinest part) of a wood wedge and just glued the two sets of legs to it.dscn4864Some of the wonderful touches are the roll of TP in the bathroom, as well as a towel rack.dscn4863I wish I could tell you the brand or where to buy these sets, they must have been in my storage for some time. I really don’t recall at all. My son thought that I had picked them up an estate sale… over the years, I have always been on the look out for pieces, materials and supplies to complete the dollhouse.

julie

Antique Thread Box

Okay, so I want to clear this up from the get-go… its the thread that is antique, not the box. 🙂

A while back I was the lucky recipient of a massive CraigsList haul of fabric. Pieces that ranged from scraps to full bolts of cotton and upholstery fabrics. Stuff that clearly ranged as far back as the seventies – lots of gold/orange/avocado green/brown combinations and newer. Such great stuff! I’ve already put some of it to use after spending nearly a week to sort through it all.

Well, in that load, there was also some other accessories. Thread, zippers, bias tape and ribbons. The thread is what I wanted to talk about.

These few spools of thread came from an era where the spools themselves were made of wood. To be perfectly honest – and I had a mother who sewed – I don’t recall the last time I saw a wooden spool. I’ve not really researched it, but I think there is some history there. And they are cool looking.

So, I wanted to be able to display them in my sewing room. I searched eBay for an antique or vintage thread holder, and one not too large, as I didn’t want this to be another one of those collections that I went out and bought a few hundred spools! (Trust me, I have been known to do dumb stuff like that!)

Well, I never did find one that I really liked, but seeing all of those on eBay and other Google searches, I had an idea of what I wanted.

Out came my trusty paint stir sticks. It is a simple enough design and I think I had everything measured and cut and the clamped to allow the glue to dry in less than an hour. I added the back, gave it a good sanding and then painted it.

DSCN4254Cute, huh? I love the simplicity of the design and there is some room to add a few spools. Down the road. 🙂

Now to find some wall space left in the sewing/quilting room!

%d bloggers like this: