Sweet Denim Bench

I picked up this little vintage bench a while back and it sat in the garage for a while before I got around to working on it. But once I started it went pretty quickly. I just can’t believe that I had forgotten to write it up. I had uploaded all the photos, just didn’t get the text written! How the heck did that happen?

DSCN3744

Originally, I hoped to restore the bench, but the top was just too damaged and stained. And it probably was a saving grace, as while taking it apart, I found that it had been stuffed with horse hair and old newspapers. And it smelled pretty bad. So, 4 inch thick green foam replaced the stinky newspapers and horse hair.

I first laid a sheet of wood across the top. All of it was painted with a beautiful deep metallic brown paint. I just love the way it sets off the carvings.

I was in the middle of harvesting denim from old blue jeans and opted to go that direction. I carefully dissembled a couple of pairs of jeans that were similar in color to use in covering the bench.

Using a pneumatic stapler, I then laid the denim over the bench, pulled taught and stapled.

DSCN4184

Once the denim was securely fastened, I needed something to cover the staples. During on of many thrifting adventures, I thought that using leather belts would be appropriate… get it? A belt on a pair of jeans! LOL

I couldn’t find any belts the same – either color or style. So I found about a half dozen leather belts that were very close in style, so I opted to spray paint them the same color as the base. The leather took the paint very well and was even malleable enough to get wrapped around the bench. I even kept the belt buckles! From there, it was simply a quick tacking over a base of glue.

DSCN4652DSCN4651DSCN4650DSCN4649DSCN4648DSCN4647DSCN4646DSCN4645DSCN4644To wrap things up nicely, a quick ‘before & after’ photo:

bench-before-after

And there it is. Another project completed. I am determined to get these projects done so that I have room in the garage for at least two cars this winter! And since fall arrived this week, winter is just around the corner!

julie

Making A Dent in the Project Pile

Work has had me worn out by the end of each day. Seems like I have the best of intentions but no energy to carry out the work for the blog page. But little by little, I am getting a few things done.

The first I am going to talk about is something that I really love… from the initial idea to its completion. I am really, really in love with this project.

dscn4734

The conception of this little project was picking up – for free – the sewing table. A very simple design with the flip open top, a run-of-the-mill design for sewing machine tables. But it was in very nice shape and I loved the simple, elegant design.

I began by removing the top. I also removed from the front the flip down pocket from the front. A simple wipe-down of the remainder brought it back to the deep rich original finish.

dscn4731Some time ago, like over two years, I picked up some Corian countertops from CraigsList. I didn’t know what I would use them for, at the time, but I always knew that they could be transformed into something beautiful. Part of the countertops – the island piece, I believed – became the top of a beautiful cafe-style table and chairs set.

DSCN2794You’ll note that this set’s table is also sewing related! The chairs were fitted with matching Corian seats. Isn’t that adorable too?

dscn4729Well, we’ve learned – The Kid and I – that Corian can be cut, sanded and routed the same as any wood. So, I wanted to make the top for the new table from the remaining pieces. Initially, laid out in the workshop, I drew a nice little rectangle but knew that would be too boring. I recently purchased a new template for making curved edges for quilt and the paper label was lying in the recycle bin right in eye sight! I used it to draw the nice half circles around the edges and with a little fidgeting, it turned out perfectly.

dscn4730It took nearly half of the longest and widest piece of the Corian, you can see in this picture what was left as well as the reverse of the curves of the cutout piece. This sitting like this gave me the idea to use the same design to create a matching mirror. Wouldn’t this look cute in the entryway of someone’s home? Or a little place in the kitchen to dash off a recipe or keep a computer handy?

The piece was cut using a jigsaw and then routed top and bottom. I opted to keep the inside edge of the mirror pristine, I think the routing would have detracted from the edge work. It was fitted with a mirror and backed with a lightweight backing and then taped with a finish tape.

dscn4737The drawer front was connected to a larger drawer, one that was salvaged from the desk turned small cabinet (and decoupaged with Atlas maps). It was the perfect width, just needed to be cut down to a size that would fit the cabinet.

dscn4738

I love that this piece was re-made without a penny being spent! Everything is remade/recycled from free materials picked up from CraigsList. I kept the tilt-out piece and just added the drawer. The Kid was crafty enough to configure a drawer tract and put it all together!

Another project finished! I’ve also worked on a couple of smaller projects at the same time… I always have to have my hands doing something! I finished cross stitching the little pillow for Mattie (hi Mattie!) to help her to remember that cubicle walls don’t have much sound protection!

Just a little pillow, about 4″ x 7″ that sits under her monitor. She picked the colors and I just happened to have the perfect fabric to use for the back.

dscn4745

I also put together this little card holder for my blog cards. It is simply two drawer pulls on a scrap of really nice wood that I had leftover. I sanded the edges into nice rounds and attached the handles simply by drilling holes into the surface and sinking them into it. No gluing, no painting, no fuss! It works for either vertical or horizontal cards. Pretty neat, if I say so myself!

And last, but not least, I made yet another little shelf with storage bottles for craft items. As many of them before, this one is made from paint sticks! I love the versatility of those free pieces of wood! And I seem to always find one or six of those little jars, so I am quickly filling up the shelves.

Well, that about does it for tonight. Tomorrow we have big plans to finish the west wall of the garage… I have to remember to take before and after photos – as well as some in between.

julie

%d bloggers like this: