Work Continues… We’re Drawing Closer to the Finish Line

I’ve always been a bit myopic in my posts, especially this one. I have always sort of seen the value of the completed project over the path of creating it. I know that it is wrong, that one thing people search out is the process of creating, in addition to the beginning and end projects. I just haven’t been the best at doing it… and I am always trying to address it.

I have several projects in the works, I talked about them in my previous posts. These particular projects have many steps, and often each step is but a few minutes and then waiting. Painting and waiting for it to dry. Staining and waiting for it to dry. Waiting for the staining and painting to attach the legs. Waiting to attach the legs so that the skirt can be attached. And it goes on and on. I’m sure you get the bigger picture.

So, today seemed to be momentous. It seemed that real steps forward were taken and results achieved. Still not done yet, but we’re getting there.

DSCN3768The door (for the dining table) has been stained and polyurethaned with two coats each. In between each coat is a light sanding. The coloring turned out gorgeous! (I am telling you, this particular project is going to be very hard for me to part with!) In this photo, you can see the underside of the door… I had to flip it over to finish – silly me, not thinking – since the door has a large piece of glass in the middle of it, you will be able to see through it! Duh! So, the table skirt also had to have more painting… again, not thinking! But the red against this deep stain color is just stunning!

DSCN3759The top of the sideboard has gotten the same treatment, although because the type of wood differed from the door, it required an extra couple of steps and some experimenting to get the color to be the same. All in all, it turned out perfect!

DSCN3769

 

We moved the sideboard (sans top and drawers) into the garage. The drawers has all the previous holes filled as I’ve finally made a decision on what hardware is going to be used. So, it took a little sanding and then re-priming and re-painting the drawer fronts.

DSCN3762DSCN3765I cleaned and painted the hardware, which was salvaged from an old piece. I used a deep metallic brown that has just a hint of sparkle to it and I think it will be spectacular when we get it installed. It has a bit of a fifties flare, I think.

DSCN3767

I am considering using the same paint for two additional head chairs and did a color test. I want to give it a chance to dry and perhaps a second coat before I make the decision. Light might help too. 🙂

DSCN3766Next up, the six chairs have been moved onto the driveway so that I could complete the priming. The weather has been absolutely gorgeous and I wanted to take advantage of the sunshine and mild temperatures. The fresh air helps when doing all the painting as well. Six cans of premium white paint and the six chairs are finally ready for their color.

Our neighbors to the right of us are having their house painted, so to protect our cars from overspray, we moved them down to the street. Thank heavens for the large circular semi-cul-de-sac that we live on, having them parked out there doesn’t interfere with traffic. Its almost too funny to think that when we bought a house with a three car garage, we thought we would actually park the vehicles in them!

DSCN3760

The wood appliques that I ordered online finally came so that I could finish the pink ombré head- and foot-boards. I like the appliques, but wasn’t paying close enough attention when I ordered them. I thought I was getting 7″ x 7″ but in reality they were 7 cm x 7 cm, so much smaller than I thought.

DSCN3763 DSCN3764

But they are just enough and add that something special that I was looking for. Now to get the side boards done. They actually came with a different head and foot board – I was just naive enough to think that they would work on any old antique bed frame. Nope! Different attachment mechanism entirely. Now I have to figure out if I can modify the ends of boards themselves or the connecting hardware in the bedframes. Sigh. Nothing ever seems to be easy.

Shown with the bed side boards on top of them

So, with that, this day is coming to a close. I am beat! Now all I want to do is take a shower, put my feet up and finish the beading project that I’ve been working on. I am this close…

julie

 

 

About MacCupcake

Obviously, a big Mac fan (my first Mac was the first Mac) and mother to the most awesome kid in the world. A techno-junkie and self-proclaimed geek... I love anything and everything relating to computers. Also love making things and figuring out how to make or adapt existing stuff into something new! Always ready to try something new!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: