Entering the final stretch…

I had no idea that this project was going to take this long. It seems that this particular project has just had the wrong timing, what with two new jobs and everything else that has been going on.

I’ve had The Kid doing the coats of polyurethane on the work surface and the very last coat went on last night. Okay, so I know that the extension doesn’t exactly match, but it is close enough considering that it will be getting dinged, dirty and resides in the garage! I am more happy that it is done.

DSCN2573

So, the butcher block top that was given to us is on the right and my 30″ extension on the left. This photo was taken when both had been sanded down to raw wood.

DSCN2574A closer look and you can see that the raw wood doesn’t even match. Again, I am okay with it even though it would have been much cooler if I had actually gotten closer to matching, but what are you gonna do?

You may have noticed the two holes drilled on either end towards the wall. Well, this is my system of getting rid of saw dust. Under the holes and behind the cabinets, I have tall plastic trash cans that will catch the saw dust. Once done working, simply sweep everything towards the holes. The trash cans can be reached on either end for dumping or what we’re likely to do is when the cans are getting full, we’ll just stick the end of the shop-vac into the holes and viola!

DSCN2577So, four coats of polyurethane and the pieces are becoming quite beautiful. But most importantly, the surfaces will be hard for all future work.

DSCN2581

The picture above shows two coats, the one below is with the fourth and final coat. Once we get the tools spread out over it, you’ll hardly notice the difference in woods.

DSCN2580

As you can see, I have kept collecting carpets (yes, free from CraigsList) for the garage floors. I occasionally will run out to the garage for something and I really hate having to stop and put on shoes. And it is easier to convince the kid to vacuum rather than sweep. Like rugs of the past, when I drop paint or stain on them, I simply roll them up and throw them away.

I am still working on a project that will house my extremely large collection of embroidery thread. I am also working on a thread that celebrates paint stir sticks and all the wonderful things that can be made from them.

Simply gluing them side to side creates a wonderfully thin piece of wood which has a nice wood grain… you can see it in the picture below:

DSCN2582

I created a template and then used to it draw the cutting lines for the drawer dividers. Luckily for me, it was The Kid’s job to make all those cuts! I will write a post from beginning to end on this storage cabinet that started life as a small desk. I love looking at something and seeing something different.

DSCN2584

Last quick update… Some time ago, I had purchased these wonderful cabinet knobs. I almost forgot about them as they did travel all the way from China. They arrived last night and so I had The Kid replace the knobs on the upper cabinets of my computer work office… and if you didn’t know it before, you will now: I am a huge Mac fanatic. This is just the icing on that revalation!
DSCN2586

A overall shot of the computer room… you almost can’t see the shapes of the knobs, but trust me, they are there. 🙂

DSCN2587

Okay, so that’s it for today. This weekend will be spent completing the garage project and getting it all in a post before I head back to work on Monday. I hope you’ll come back and see the grand unveiling!

julie

 

Garage Remodel: Workshop

As you may know, I have been putting in a lot of time and effort to making my garage a better place to work and be able to park my vehicles inside. I have started a new job and it seems that a lot of my time and thinking are spent there and not at home and in the garage.

We did quite a bit of work this weekend, but still not finished. DSCN2562From this photo, you can see that I was able to get at least one car into the garage. We’re smack dab in the middle of tornado season and I just finished paying off my little sports car, so I was happy to have it garaged.

DSCN2563I did pick up the grey cupboards and got them installed, along with the butcher block counter that came from a free work table. I loved the countertop, but didn’t want the open space below, it was much too easy for things to just get jammed in there and look messy and dirty and filled with saw dust.

The top wasn’t long enough to cover both cabinets, so I made an extension. I cute 2 x 2’s into 30″ segments and glue and screw them together. Then I used a concoction of glue and saw dust to fill into the spaces left from the slightly rounded edges of 2 x 2’s and let them dry. The pieces all assembled were a tad too shallow to match up with the existing countertop, so I glue the pieces to a sheet of 3/8’s luan, which actually stabilizes it as well. I bought another tool that I’ve been wanting, a belt sander, to make the job of smoothing it all a tad easier.

DSCN2564The piece was laid end-to-end with the butcher block and then glued. The entire top was bolted to the lower cabinet and inset to keep a smooth surface. I opted to cut off the corner as I could easily envision bumping it with my hip every single time I came into the garage. 🙂

This week, The Kid has been tasked with sanding the existing butcher block top down to bare wood and then I will put a few coats of polyurethane to give it a nice hard surface that should endure. And it should look pretty sharp too. I am hoping that by the end of next weekend, this will be completed.

DSCN2572At the right end of the work surface is a 10 foot high storage. The space not easily accessed holds less used items and the center I made into a paint station. The paint rollers are stored on a dowel placed end to end inside the cabinet and one cubby hole below holds brushes of all kinds and roller pads. The lower cabinet will house the shop vac and all of its accessories as well as some other materials that just are unsightly. Still room at this point to use to store tools and materials.

At the right of the photo in the smaller garage stall are two (free) shelving units, one holds tools boxes and the other holds the one gallon paint cans. The quart cans, the sample jars and spray paint are all house in one of the existing cabinets the line the back of the the garage.

DSCN2571At the end of the white shelving units are a little workstation. I picked up this smaller sized cabinets I picked up free from CraigsList a year or so ago. On top is a piece of salvaged Corian countertop and then collected drawers are utilized to create storage for much used materials, like sandpaper for the sanders.

DSCN2570This is a quick shot of the third stall, currently packed with projects and more materials. Once again, from CraigsList, I got the carpet squares free and it pretty much carpeted this side of the garage. It will serve as a nicer place to showcase finished items and they can be parked on once winter comes. Heck of a mess, right? I know it is driving me crazy to not have more organization here!

I did manage to get the dead trees in front of the house replaced as well. Hopefully these will fare better than the previous ones, I even used Miracle Grow potting mix to plant them.

DSCN2566

DSCN2565

DSCN2567

DSCN2569

The Kid has been working on his own project as well, this is going to be a metal forge. A couple of weekends ago, he and I walked along the train track near the silos downtown and picked up pieces of coal that had escaped from the coal cars. We ended the night getting what we needed, but was escorted off the premises by two of Kansas City’s finest. I guess that trespassing around large train cars is bad or maybe dangerous… but I guess I can understand it from the railroad’s point of view.

Once The Kid has made some progress, I will let him do a guest blog post to explain what he is making and how to do it. Again, for him it is good skills to have and to know that it isn’t something that he would want to do for a living. I keep telling him that he is better off working with his head than his hands and his back.

Just as soon as this garage project is done, I will have photos up here. Thanks for hanging in there with me!

Garage Makeover… Or How to Utilize Vertical Space to Get More Room

So, the plan has been in the making for months. Maybe even years. No matter how big, it never seems big enough. Now that I have returned to my furniture restoration/makeovers, I have taken over more of the space in my three car garage and we are back to the point of not having enough space for any cars!

photo 4Not only is this just bugging the crap out of me, but it really means the investment in my cars is being dismissed. We’re smack dab in the middle of tornado season (along with hail and strong winds) and I hate to think about not being able to get the cars in the garage when I needed.

So… we’re doing a garage makeover. I am framing a wall between the second and third bays of the garage and utilizing the height for more storage. Besides, the uneven (not to mention ug-a-LEE)DSCN2541 table that I have my power tools is definitely not the quality that I am used to.

So, the wall is being sheet-rocked on one side and the other side has pegboard from floor-to-ten foot ceilings. Lots of things hanging and out of the way. It also means nothing to interfere with getting the car into that third bay when I need to. Me and The Kid (and even the old man himself) spent a couple of days building the stud wall and then me and the Kid did all the sheet rocking. It was fun learning how to do mudding and taping – we watched a YouTube video on how to do it. It is one of those things that is really great to have in your repertoire even if you never do it again. And it makes you appreciate those that do that job for a living… it isn’t easy!

photo 2

photo

Update:

The mudding and taping was completed, even if not perfect. I opted with good enough and done, rather than perfect. The Kid went ahead and painted the wall, leftover paint from the original house colors and it looks good. I haven’t decided about the other side, the peg board is by default white and I think I can live with that.

photo 3

I’ve moved in some of the cabinets which used to sit side-by-side and now there are stacked. Ten feet of vertical storage only occupying about six square feet of garage floor. And it is white, like the other cabinetry that already exists in the garage. We did a California Closets setup when we first bought the house and I have loved, loved, photo 1LOVED all that storage. I found really nice cabinets on CraigsList for about $150 which will be perfect for the tools to sit on, although they are grey. But they are still very nice. We should be picking them up Saturday morning. This weekend is going to be very busy while we’re attempting to get this done.

Another Update:

Picked up the cabinets this morning and spent the day cleaning, reorganizing and discarding the useless junk that seems to pile up when you’re not looking. Months ago, I picked up carpet squares from CraigsList, so I stripped the old, dirty and stained carpets that I had on the floor of the garage and laid out the carpet squares. Then it was time to move all the project pieces into the smaller side so that (hopefully) we can finish the large side tomorrow. My arms, knees and back are killing me and I really need a solid night’s sleep so that I can get right back into it tomorrow.

julie

%d bloggers like this: